Jump to content

Recommended Posts

Posted

i just got bak from the dunes and i had one pipe that throws more smoke than the other i have a 4mm stroke with drag port, blaster pistons, vf3, 35 air strikers, t5 pipes, lightened flywheel and wut should i do next i wus thinking alcohol and drag pipes will i notice a big difference with that

Posted

Did you run new plugs?Are the carbs in sinc..both fuel mixtures the same...In-frame drag pipes will wake that beast up.Your performance is down with the t-5 on a drag port 4 mill...Alky is another story..Need different domes to run higher compression for alky,Somewhere around 200 psi for top performance also need power jets for the carbs.Lots of options but I would figure out why it is smoking on one side first before rolling the dice again.

Posted

Before I would even think about Alky, I would look into and override and lockup. Sucking coolant will also cause it to smoke bad on one side if you have a bad or pinced o-ring. Does it ever spit coolant?

Posted

I would do a couple of things - take your carbs apart and clean them and check your plugs do a compression test and check your reeds. You didn't mention a timing advance - get a plate and advance it 3-4 degrees it'll wake it up if it's not done already also if you aren't running a dyna fs ignition throw iridium plugs in - they are indexed from the factory and the open electrode points at your intake every time it helps a bit. I would also get rid of the t5's and get some good in frames and maybe some clutch work. Also what kind of fuel are you running? some avgas or 110 will make it run better too

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...