NOSSHEAD

[jharader]

I cant get my nosshead to seal guys, can i use the pro-design head with these domes on my 421 cub? Tired of dicking with this pos

[jharader]

Kinda need to order a new head like NOW will it work? or should i purchase another noss? i prefer the pd

[monster_energy06]

yes noss domes fit pro design and vise versa,, wwere are u having drouble sealing yru head??

[jharader]

the two center studs in front, Ive put 2 oring kits in this thing now, put the orings in, tryed using silicone on top of the head to, thinking its warped? Its really pissing me off, i dont like the nosshead finish either, whoever ran the face mill on it shoulda SLOWED DOWN amature machinists :geek: Think im just going to order the pro-design, this is dumb and getting tired of taking the cpi's on and off.

[Bansh-eman]

your jugs could be warped, Dajpgejr had a problem with the first cub he woned being warped too

[jharader]

i will act like i didnt hear that lol

[Bansh-eman]

well unfortunately the head probly is fine, if its new send david noss a pm on here i'm sure he will take care of you

 

edit: see man couldhave bough my bike and been ripping already lol, sry i had to do it

[jharader]

lol ya i hear ya, i gotta ride it for about 10 minutes yesterday before i noticed it again, boy im sold on these motors tho!! wow, thing trys to pull off the ground in 4th with just throttle, my other shee's dont compare, period. still fun to ride though, the head is old, its been on there awhile i can tell, im going to order the prodesign, if thats not the problem i guess one of the other bikes get a nice shinny new head :cool: its only money

[Bansh-eman]

lol ya i hear ya, i gotta ride it for about 10 minutes yesterday before i noticed it again, boy im sold on these motors tho!! wow, thing trys to pull off the ground in 4th with just throttle, my other shee's dont compare, period. still fun to ride though, the head is old, its been on there awhile i can tell, im going to order the prodesign, if thats not the problem i guess one of the other bikes get a nice shinny new head :cool: its only money

if i were in your situation i would buy a cariot head not a PD, and they are cheaper thats alays a plus

[dlnoss]

If you have a problem with my product, usually the best thing to do would be to contact me about it instead of bashing the product, me, and my machining abilities. It makes it a lot more fun for me to help you.

 

Send the head back for a refund if you want. If you haven't beaten it all up, I'll refund your money.

 

Might want to be sure what the problem is so you don't have the same problem with the next head, whatever brand you buy.

 

-David

[show]

If you have a problem with my product, usually the best thing to do would be to contact me about it instead of bashing the product, me, and my machining abilities. It makes it a lot more fun for me to help you.

 

Send the head back for a refund if you want. If you haven't beaten it all up, I'll refund your money.

 

Might want to be sure what the problem is so you don't have the same problem with the next head, whatever brand you buy.

 

-David

 

lol high quality sh!t right there, chatter is not cool.

[okbeast]

Wow you made urself look like a jackass. You have no fuckin clue what is causing the problem and you just come on and assume it's the head b/c it's the easiest thing to replace and bash the builder. I hope you get your problem fixed though.

[Colby]

well, I wouldn't rule out anything, and dont think he should've bashed the product/builder, but that very well could be the problem..... hope ya get it fixed though, and good luck w/ your next product purchase.

[jharader]

wheeeweee lol good lord u guys i didnt "bash" anything, did i say dont buy this product? its junk, steer clear of it? no i said i cant get it to seal, the finish is poor on it and ive wasted 45 bux in o-rings on it, i apologize to the "builder" simply because it may have offended him, not because i was out of line! can i not voice my opinion on a product and seek advice?? isnt that what this whole bhq is about?? It was the head btw, i borrowed a buddies "nosshead" magine that to see if it'd seal up, worked fine.. Its a simple case of a frustrated buyer not being able to ride his new shee cuz of some dumb shi* now that its settled ill sale the head for 5bux to offset the advil cost :biggrin:

[okbeast]

wheeeweee lol good lord u guys i didnt "bash" anything, did i say dont buy this product? its junk, steer clear of it? no i said i cant get it to seal, the finish is poor on it and ive wasted 45 bux in o-rings on it, i apologize to the "builder" simply because it may have offended him, not because i was out of line! can i not voice my opinion on a product and seek advice?? isnt that what this whole bhq is about?? It was the head btw, i borrowed a buddies "nosshead" magine that to see if it'd seal up, worked fine.. Its a simple case of a frustrated buyer not being able to ride his new shee cuz of some dumb shi* now that its settled ill sale the head for 5bux to offset the advil cost :biggrin:

 

No sorry that's not how it works. 1st seek advice, THEN contact the builder (he did make it, he probably know wtf to do to fix it or will help you out with it), then you can complain.

 

As stated above by dlnoss, call him, maybe if he doesn't think ur a dumbass he'll help you out.