help look at these pics

[axlracing]

hey here is the link to pics of my carbs this is kinda hard to explain but there is a little brass looking tube that i have on one carb but not both of them. its a little brass tube that goes into the bowl i have a pic of both carbs on has it and one is missing is it sopost to be like this thanks alot axl http://i278.photobucket.com/albums/kk97/ax...heecarbs002.jpg

Edited May 6, 2008 by axlracing

[350BANSHEE350]

thats for the choke, with that being said, you need to make sure you have the proper bowl on that carb

[axlracing]

thats for the choke, with that being said, you need to make sure you have the proper bowl on that carb

so there is not supost to be a brass tube like that on the carb without the choke? and i just went out and looked at my bowls and they both look indentical to me except when you look in the inside onw bowl says 1-1 and the other says 1-2 thanks alot axl

[axlracing]

any idea what bowl goes on what carb?

[NitroTate]

I've always questioned this myself because both of my bowls have the tube and are identical... Did Yamaha do this back in 89' or do I have two of one bowl type in error???

[Black&Red87]

1-1 should go to the choke tube and be on the left side. If the setup is wrong it will run like crap.