Jump to content

Recommended Posts

Posted

1) pulled the plugs after putting 90 miles of trail ridding, they seem to have carbon build up on them that you can pick off with a finger nail, should i go down in jeting?

I have KN no lid

FMF fatties

280 mains

 

2) when rolling my banshee around in gear with the clutch all the way in i can hear the motor try to turn over every once and a while, should i readjust it?

 

Other than that it was a lot of fun, up around Baldwin MI riding ORV trails

Posted
1) pulled the plugs after putting 90 miles of trail ridding, they seem to have carbon build up on them that you can pick off with a finger nail, should i go down in jeting?

I have KN no lid

FMF fatties

280 mains

 

2) when rolling my banshee around in gear with the clutch all the way in i can hear the motor try to turn over every once and a while, should i readjust it?

 

Other than that it was a lot of fun, up around Baldwin MI riding ORV trails

1)You really need to get some new plugs and do a correct plug chop to find out for sure. Search for the link.

2)If this was when it was cold it does happen.

Posted

Im just a newb but I think if your putting 90 miles on plugs and not fouling them out you cant be running very rich... I dont think its going to hurt your performance. I change my plugs every 16 hours anyways...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...