thecableguy006 Posted April 28, 2008 Report Posted April 28, 2008 top end just rebuilt about 10 to 15 hours on it now. i just did a compression test and i have 150lbs on the left and 30 on the right. my reeds are good i have found no leaks anywhere. the bike starts up on 1 or 2 kicks every time so im not sure what to do. the bike still has power when i ride it so i dont think it is blown or is it? and when i pull the plugs out the left looks good an dry and the right is always wet. what do i do? thanks Quote
SAVAGE420 Posted April 28, 2008 Report Posted April 28, 2008 (edited) top end just rebuilt about 10 to 15 hours on it now. i just did a compression test and i have 150lbs on the left and 30 on the right. my reeds are good i have found no leaks anywhere. the bike starts up on 1 or 2 kicks every time so im not sure what to do. the bike still has power when i ride it so i dont think it is blown or is it? and when i pull the plugs out the left looks good an dry and the right is always wet. what do i do? thanks Did you check that side a bunch with the gauge? i would pull that side apart and see if a piece of the ring let loose and blew out your exhaust, it happens! Don't ride it anymore till you find out or you could seriously eff it up when it could only be a $10 fix Edited April 28, 2008 by savage420 Quote
LS1Inferno Posted April 28, 2008 Report Posted April 28, 2008 get a leak down tester, Could be a bad seal, it should NOT run right like that. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.