89shee Posted April 18, 2008 Report Posted April 18, 2008 ok i finally got my shee toghether . it wont start . it sounds like it wants to but nothing . the pipes get hot but nothing. i dragged it down the road but it try to start but as soon as you stopped pulling same thing. after i pulled it i tried kicking and it sounded really good but still nothing. any help guys. i have a 2 into 1 carb toomey pipes. entire motor was rebuilt by me. i have compression and spark every time i pull the plugs they look dry but every couple of kicks i get some flame out the header (silencers are off) Quote
xXBlessedWithDeathXx Posted April 18, 2008 Report Posted April 18, 2008 ok i finally got my shee toghether . it wont start . it sounds like it wants to but nothing . the pipes get hot but nothing. i dragged it down the road but it try to start but as soon as you stopped pulling same thing. after i pulled it i tried kicking and it sounded really good but still nothing. any help guys. i have a 2 into 1 carb toomey pipes. entire motor was rebuilt by me. i have compression and spark every time i pull the plugs they look dry but every couple of kicks i get some flame out the header (silencers are off) Did you put the pistons in the right way. Quote
89shee Posted April 18, 2008 Author Report Posted April 18, 2008 yes sir arrow pointing towards the exhaust. Quote
xXBlessedWithDeathXx Posted April 18, 2008 Report Posted April 18, 2008 I`m kinda lost on this one. Gas on? did you leave a rag or 2 in the motor? try loosening the bolt on the bottom of the carb to see if gas comes out. Quote
89shee Posted April 18, 2008 Author Report Posted April 18, 2008 ha ha no no rags. i took the bolt off and gas came out so im not sure ha ha. i have a ride to go on this weekend and there all gonna b 2strokes dont wanna go with a thumper :: Quote
89shee Posted April 18, 2008 Author Report Posted April 18, 2008 did u put the little cross over tube between the carbs???timing set? plugs sparking? plugs installed? 2 into 1 carb no crosssover tube flywheel is good plugs sparking Quote
bunboy1 Posted April 18, 2008 Report Posted April 18, 2008 i cant get my shee to start either, i think i am gonna bite the bullet and take it to a shop. Quote
89shee Posted April 18, 2008 Author Report Posted April 18, 2008 (edited) is the kill switch in the STOP position?( this may sound stupid but i've seen it done alot)\i was thinking that because my kill switch is really old and it doesnt click over to run or off it slides over with ease was wondering if the actual switch may be broken . does the bike get spark when its switched to off? . if i disconnect should it work or do i need it hooked up? and bunboy good luck i will damn sure not take my bike to a local shop ha ha Edited April 18, 2008 by 89shee Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.