SAVAGE420 Posted March 27, 2008 Report Posted March 27, 2008 There the ones with the little nubb tubes on top that the boost bottle slides onto. I want it OUTA there so can i just cap off the top of those tubes that protrude from the intakes? A normal boost bottle has 2 tubes that come out the bottom..These have 2 holes on the bottom that slides ONTO the intake that has the tubes built to them...What should i do peoples? Quote
Bansh-eman Posted March 27, 2008 Report Posted March 27, 2008 you can plug them but i would just sell the whole thing and get a new intake with a built in cross over and be done with it Quote
gregrob Posted March 27, 2008 Report Posted March 27, 2008 I'd say you could ditch the BB and run a piece of rubber hose for your cross over tube. Clamp it onto the intakes. Quote
05Special Posted March 27, 2008 Report Posted March 27, 2008 I made one out of copper pipe and a few elbows :biggrin: yea i'm a plumber Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.