ClimbAnyHill Posted March 5, 2008 Report Posted March 5, 2008 get the one from sears, i wan to say they are like 20 bucks but they are alot more sturdy then harbor frieght You're right and I can do that. Only 14 bux more, I'll check em out this weekend. Thanks. Quote
tgbanshee Posted March 5, 2008 Report Posted March 5, 2008 (edited) Those screw extractors are an absolute must have IMO. I broke the head off one of the bearing stopper plate screws when I was rebuilding my motor and had put loctite on the threads. I almost shit a brick, then realized I had the screw extractors in the toolbox. Zipped the shank right out. Edited March 5, 2008 by tgbanshee Quote
meanv10 Posted March 5, 2008 Report Posted March 5, 2008 When i stripped/ broke my pegs on my atv all i did was drill it out with a standard and tap it one size up, then switched to hardened SHCS do no if you could do that there but just an idea. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.