Face Posted March 3, 2008 Report Posted March 3, 2008 I have recently had the top end gone through and milled my head. when I run my bike I still have problems getting it started. It will usually start the first few times I kisck it but after riding for a while it wont kick start but it will push start. My kill switch has never worked but the key used to work. It stoped about four trips ago and since then I have been having this problem. Is it the key assembly or something bad. Any info would be great. I am such a dunce, I would be dead w/o the HQ! Quote
LS1Inferno Posted March 3, 2008 Report Posted March 3, 2008 my guess is short in the wire system .and the kill switch can be fixed mine just had a little metal clip pop out of place, i took it apart and put it back together and it worked ever since. Quote
inthemail Posted March 4, 2008 Report Posted March 4, 2008 if it was a short why would it roll start??? but judging by the problems your having with your wiring it seems, ill point you to the electrical faq, spend some time building yourself a new harness without all the bullshit :cool: Electrical FAQ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.