sheesa350 Posted February 24, 2008 Report Posted February 24, 2008 ok thers a scre peice on a little rod for the clutch with a nut to lock an all that.. now to make my clutch grab better would i twist it in or out for it to grab better Quote
man27 Posted February 25, 2008 Report Posted February 25, 2008 ok thers a scre peice on a little rod for the clutch with a nut to lock an all that.. now to make my clutch grab better would i twist it in or out for it to grab better The nut your talking about is to give you a little more adjustment. If you turn it counter clockwise it will give you more adjustment. Look at chapter 6 in the clymer,Hope this helps :beer: Quote
sheesa350 Posted February 25, 2008 Author Report Posted February 25, 2008 ok i put my clutch back together an its slippin a little so if i turn it counter clockwise it will grab better.. all pads are good clutch is still new justt need that final touch adjust Quote
MILO Posted February 25, 2008 Report Posted February 25, 2008 hey bud, b4 making adjustments anywhere for your clutch you need to make sure that your arrows are lining up on the clutch arm. loosen the cable at the perch, push the clutch arm (opp. end of cable at the motor) in toward the ctr of the bike by hand until it stops. the arrow on the arm should line up with the arrow on the case. if not then adjust the screw in the ctr of the clutch to make them line up. that's all you do with that adjustment. tighten it up to hold it in place. then adjust at the perch as needed. if it still doesn't work you may be in for a new cable, that is if all else is fine with your clutch. you need to invest in a clymer's bud. it's the best $30 you'll spend on your shee. :thumbsup: Quote
sheesa350 Posted February 25, 2008 Author Report Posted February 25, 2008 alright thats what i needed to hear thats making the sence to me .. thnx butt ya i need the manual butt right now im broke as shat payin back money i owe people so that i could buy this thing so now it makes it hard on me .. when i come across thigns like this .. butt thnx Quote
sheesa350 Posted February 25, 2008 Author Report Posted February 25, 2008 also would my oil in the case be making ne diff oon it slipping im using kendall high performance 10w 30 in there whats a good oil for me Quote
man27 Posted February 26, 2008 Report Posted February 26, 2008 also would my oil in the case be making ne diff oon it slipping im using kendall high performance 10w 30 in there whats a good oil for me I run gear saver 85W.... Quote
sheesa350 Posted February 26, 2008 Author Report Posted February 26, 2008 milo dude thanksssss did exactly what u said just got done an shee feels niiiiiiiice .. lovin it .. my lever should feel a lil stiffer when pulling it in right.. ya im sure butt ne way wanted to say thanxx for tellin me step by step .. :biggrin: :biggrin: :biggrin: Quote
qboronyrican Posted February 26, 2008 Report Posted February 26, 2008 i think if you search manual on here there is a downloadable manual on one of these sticky's Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.