Still Having Troubles With T-5s

[350BANSHEE350]

okay so basics t-5s and pro design air filter kit with lid removed and 3700-4000 feet aboce sea level

for 20 degrees celcius

 

i got my main figured out with a 250

but when i have it sitting still in idle and i slam the throttle from dead idle (note i have my idle pretty low, pretty much as low as you can go) it blurs and dies, is this right? i mean from 0% throttle to 100%

i would think its normal because thats a big breathe if you know what i mean

but if i just tap it to like 1/4 or 1/2 its fine and revs up quite nicely

 

if this is a problem going from 0 to 100 percent idle would i be able to fix this problem by picking up the needle 1 notch or is it pilot jet?

 

i have not had the chance to ride it yet due to snow but should be able to eventually

 

thanks guys

[fastbanshee8]

Turn your air mixture screws in 1/4-1/2 turn on each carb, and see if that helps. If you end up with the air mixture screws less than 1 turn open, then you will have to go up one size on the pilots, and re-adjust the air mixture screws. Just make sure both air mixture screws are adjusted the same.