fastquad02blaster Posted January 16, 2008 Report Posted January 16, 2008 What should the floats be adjusted to? I know how to adjust them, just need a measurement of some type. I'm pretty sure they need adjusted. I was riding yesterday for a minute or two and when I would get into it in any gear, it felt like it would run out of gas. I would sit and let it idle and it would fill the bowls back up and same thing again... Quote
dajogejr Posted January 16, 2008 Report Posted January 16, 2008 What should the floats be adjusted to? I know how to adjust them, just need a measurement of some type. I'm pretty sure they need adjusted. I was riding yesterday for a minute or two and when I would get into it in any gear, it felt like it would run out of gas. I would sit and let it idle and it would fill the bowls back up and same thing again... turn the carb upside down, the bottom (top of if they're upside down) of the float should be level flat. If they're set, check one of two things, vent line plugged from the gas cap...or junk in the screen of your fuel valve... Quote
shee4speed Posted January 17, 2008 Report Posted January 17, 2008 When the carbs are upside down.From the base of the carb without the gasket to the top of the float should be 21mm. Quote
fastquad02blaster Posted January 17, 2008 Author Report Posted January 17, 2008 By fuel valve you mean the petcock right on the bottom of the gas tank right? Quote
fastquad02blaster Posted January 20, 2008 Author Report Posted January 20, 2008 I pulled my hose off of my petcock and watched it flow, it flowed a full stream and didn't stop untill I shut it back off. I'm really thinking that my floats need adjusted. I got halfway into it today and had to quit and go to a birthday party. I'll check them out and hopefully rejet it while I'm in there too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.