Jump to content

Recommended Posts

Posted

I just got a set of vf3 reeds I bought off the net. They look real good except for one thing. I dont have a pic so i will try to describe the problem. Anyone who has had a set of these in their hand should know what Im talking about. If you lay them flat like on a table you are looking at the point where the two reeds meet. At the bottom of the reeds there is a thin plastic bar that goes over the reeds. The problem is one of the bars is missing. It wasnt in the package and looks like it was actually part of the flange. Are these usable like this or are they junk? Thanks for the help/

Posted
I just got a set of vf3 reeds I bought off the net. They look real good except for one thing. I dont have a pic so i will try to describe the problem. Anyone who has had a set of these in their hand should know what Im talking about. If you lay them flat like on a table you are looking at the point where the two reeds meet. At the bottom of the reeds there is a thin plastic bar that goes over the reeds. The problem is one of the bars is missing. It wasnt in the package and looks like it was actually part of the flange. Are these usable like this or are they junk? Thanks for the help/

 

 

is it the part that the red arrow points 2? it goes threw the length of the reeds holding them in place.

 

911159.jpg

 

 

 

the only way to replace the plastic piece that holds the reeds in place is to get a new set of reed pedals (they also replace that piece) or send me a PM with your address cuz i just got 2 new sets so i have that extra part.

Posted
is it the part that the red arrow points 2? it goes threw the length of the reeds holding them in place.

 

911159.jpg

the only way to replace the plastic piece that holds the reeds in place is to get a new set of reed pedals (they also replace that piece) or send me a PM with your address cuz i just got 2 new sets so i have that extra part.

 

 

 

I put the arrow on the piece above your arrow thats missing. Thanks for your help

Posted

I guess my upload didnt work. If you look at your pic. Straight above your arrow point is the mounting holes where they bolt to the jug. The black bar runs from side to side. Its right above your arrow.

Posted

I think he means where i put the green arrow.

911159-1.jpg

Posted
I think he means where i put the green arrow.

911159-1.jpg

 

 

if thats the case i would have to say your screwed. the reeds come apart in 8 parts counting the pedals. that part holds your outer reeds in. i never seen that part for sale but if you call V-force you may have a chance. thats what i would do.

Posted (edited)
if thats the case i would have to say your screwed. the reeds come apart in 8 parts counting the pedals. that part holds your outer reeds in. i never seen that part for sale but if you call V-force you may have a chance. thats what i would do.

\

 

 

Yes, Unfortunately the green arrow is what I'm talking about.

Edited by sheerocks
Posted

I contacted the guy. He says they looked fine when removed and he never noticed it. Also says it ran fine. Is it possible he used them like this? I popped the reeds out and its actually part of the mounting flange where it bolts on the jug.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...