jenzie Posted December 29, 2007 Report Posted December 29, 2007 (edited) Hello there, :biggrin: I am a new banshee owner from Belgium. I have a question about wich size of mains i have to use and the position of the needle clip. The mods on my shee are K&N single filter pro desing adapter no lid stock engine stock carbs aftermarket exhaust from Doma-Racing its like a FMF or a pro circuit. I have different sizes of mains, 190,200,220,240,280,290,300,325. Thanks Edited December 29, 2007 by jenzie Quote
akita8 Posted January 6, 2008 Report Posted January 6, 2008 I would say 280-300 main and the needle in the center position. Quote
sheerider1026 Posted January 6, 2008 Report Posted January 6, 2008 yeah what he said^^^^ that would be a good startng point, read the plugs and go from there.. whats your alt?? Quote
jenzie Posted January 27, 2008 Author Report Posted January 27, 2008 (edited) Yesterday i put the Doma-racing pipes and the K&N filter on and started to jet the carbs, no lid on the airbox. First i tried 300 mains but i had the feeling it was to rich and the sparks where a little to black. So i tried 280 mains,needle clip in center position and airscrew 1.5 turns out and now it runs very good and sparks are brown. Edited January 27, 2008 by jenzie Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.