kandkshee Posted December 3, 2007 Report Share Posted December 3, 2007 i just rebuilt my banshee it has a 4mill it starts fine and when it hits the power band it gos no were i think it might be the clutch any other theorys Quote Link to comment Share on other sites More sharing options...
Screaming Yellow Zonker Posted December 3, 2007 Report Share Posted December 3, 2007 does it rev up? did you rejet after the stroker? Is it a stock clutch? If it revs up and the tires arent breaking free than you have a clutch problem. did you adjust the clutch according to the arrow on the case? Quote Link to comment Share on other sites More sharing options...
00tbanshee Posted December 3, 2007 Report Share Posted December 3, 2007 make sure your clutch lever has alittle play before it pulls the cable Quote Link to comment Share on other sites More sharing options...
blowit Posted December 3, 2007 Report Share Posted December 3, 2007 Tires slipping on wheels. :thumbsup: Brandon Quote Link to comment Share on other sites More sharing options...
kandkshee Posted December 4, 2007 Author Report Share Posted December 4, 2007 carbs are 35 keline and were jetted for this motor but the clutch is a barnett but it has stock every thing else in the clutch and their is no way the tires can slip on the wheels their beadlocks Quote Link to comment Share on other sites More sharing options...
kandkshee Posted December 4, 2007 Author Report Share Posted December 4, 2007 also the top end is a vitos 404 mono block with lots of power that what leads me to believe the clutch is slipping Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.