slowpokebanshee Posted October 30, 2007 Report Share Posted October 30, 2007 okay I ahve some 34mm flatslides I am trying to get to a starting point on the banshee, they came w/ mainjet 150 pilot 35 dumptube/needle jet R-O needle 6fp63 I have since acquired P-6 dump tubes, 280 main jets, and 40 pilots, my question is what needle do I need to run w/these needle jets/dump tubes? currently with these large needles, the slides will not close all the way, even with the idle screw out, and needle on the furthest clip, obvious needle to dump tube fit is incorrect, any help wwill be appreciated, thank you Quote Link to comment Share on other sites More sharing options...
slowpokebanshee Posted November 2, 2007 Author Report Share Posted November 2, 2007 bump Quote Link to comment Share on other sites More sharing options...
slowpokebanshee Posted November 9, 2007 Author Report Share Posted November 9, 2007 please help, thanks giving is in two weeks, and I want to try these carbs. Quote Link to comment Share on other sites More sharing options...
JOBEY Posted November 9, 2007 Report Share Posted November 9, 2007 This is what I ran when I had my Mikuni TM 34. Mine where bored out to 35.5 but this should get you close. Main Jet: 340 Pilot Jet: 50 Needle Jet: 389 Q-2 Jet Needle: 5FP17 2nd from blunt end Had these on a Fully ported K&T Bike Quote Link to comment Share on other sites More sharing options...
slowpokebanshee Posted December 6, 2007 Author Report Share Posted December 6, 2007 5fp17 needle? anyone know if that will work with my p-6 dump tubes? I missed changing carbs at thanksgiving, but have some down time now, next trip not til January..... any help please? Quote Link to comment Share on other sites More sharing options...
slowpokebanshee Posted December 24, 2007 Author Report Share Posted December 24, 2007 okay.....anyone? please tell me which needles to run w/p-6 tubes? thanks Ireally wanna run these carbs Quote Link to comment Share on other sites More sharing options...
Fireroad Express Posted January 7, 2008 Report Share Posted January 7, 2008 what are your mods? i switched to 34 tm's a month ago. let me know, i'll try and help. Quote Link to comment Share on other sites More sharing options...
slowpokebanshee Posted January 8, 2008 Author Report Share Posted January 8, 2008 what are your mods? i switched to 34 tm's a month ago. let me know, i'll try and help. sounds like similar mods, which dump tube are you running? I see you have 370 mains? Quote Link to comment Share on other sites More sharing options...
Fireroad Express Posted January 8, 2008 Report Share Posted January 8, 2008 (edited) yo , i pm'd ya with some more info. i'll have a look at the dump tubes on friday.i let you know what size they are. the jetting i have listed in my mod list is for 50 F to 60 F . Edited January 8, 2008 by the grinch Quote Link to comment Share on other sites More sharing options...
slowpokebanshee Posted January 13, 2008 Author Report Share Posted January 13, 2008 well??? anyone? going out to Glamis next weekend, anyone else? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.