34 mm flatslide mikunis

[slowpokebanshee]

okay I ahve some 34mm flatslides I am trying to get to a starting point on the banshee, they came w/

mainjet 150

pilot 35

dumptube/needle jet R-O

needle 6fp63

 

I have since acquired P-6 dump tubes, 280 main jets, and 40 pilots, my question is what needle do I need to run w/these needle jets/dump tubes? currently with these large needles, the slides will not close all the way, even with the idle screw out, and needle on the furthest clip, obvious needle to dump tube fit is incorrect,

 

any help wwill be appreciated, thank you

[slowpokebanshee]

bump

[slowpokebanshee]

please help, thanks giving is in two weeks, and I want to try these carbs.

[JOBEY]

This is what I ran when I had my Mikuni TM 34. Mine where bored out to 35.5 but this should get you close.

 

Main Jet: 340

Pilot Jet: 50

Needle Jet: 389 Q-2

Jet Needle: 5FP17 2nd from blunt end

 

Had these on a Fully ported K&T Bike

[slowpokebanshee]

5fp17 needle?

 

anyone know if that will work with my p-6 dump tubes?

 

I missed changing carbs at thanksgiving, but have some down time now, next trip not til January.....

any help please?

[slowpokebanshee]

okay.....anyone? please tell me which needles to run w/p-6 tubes?

 

thanks Ireally wanna run these carbs

[Fireroad Express]

what are your mods? i switched to 34 tm's a month ago. let me know, i'll try and help.

[slowpokebanshee]

what are your mods? i switched to 34 tm's a month ago. let me know, i'll try and help.

sounds like similar mods, which dump tube are you running? I see you have 370 mains?

[Fireroad Express]

yo , i pm'd ya with some more info. i'll have a look at the dump tubes on friday.i let you know what size they are. the jetting i have listed in my mod list is for 50 F to 60 F .

Edited January 8, 2008 by the grinch

[slowpokebanshee]

well???

anyone?

going out to Glamis next weekend, anyone else?