tourqeypig Posted October 28, 2007 Report Posted October 28, 2007 So I Traded My Yamaha 426 Four stroke ($1000) for the Shee. :biggrin: I changed the Jets, Removed the TORS, and it fired right up. I rode it for the Third time after I cleaned it up and.....The rear Wheel fell off..All four hub bolts snapped because of a crappy spacer. Wow. the tourque is nasty. But I have to Ride this weekend coming. I am removing the weel spacers, Can I replace the bolts or do I need a New Hub??? Where can I get the parts In a Flash? Quote
jbooker82 Posted October 28, 2007 Report Posted October 28, 2007 Yea you can use bolts throught the hub and spacer. That is what some spacers come with. Some have extended studs that tread on over the stock studs too. Quote
tourqeypig Posted October 28, 2007 Author Report Posted October 28, 2007 The Actual HUB bolts snapped and I dont have the old parts. (came this way). Can I take the original bolts that are broken off of the original hub? Quote
Coupelx Posted October 29, 2007 Report Posted October 29, 2007 you can replace just the studs in the hub. they are press fit from the back and you should be able to tap them out with a punch and hammer. most atv shops have them in stock. Quote
Bansh-eman Posted October 29, 2007 Report Posted October 29, 2007 this is the part number to the bolts for the hub 90114-10009-00 Quote
tourqeypig Posted October 29, 2007 Author Report Posted October 29, 2007 I have had only about two min to work on it, the stupid things are not coming out with a simple tap, I didnt want to bend anything. I will have to try later to punch them out. Thanks everyone for letting me know they come out. I will write tomorrow to tell yas if it came out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.