krauss4 Posted October 23, 2007 Report Posted October 23, 2007 i have a 4 mill ported 210 compression runs on 110 with toomeys, banshee and want to get bigger carbs. im looking at 35mm but which ones do u guys think i should get. its pretty much a drag bike so wot most of the time Quote
06BaNsHeE Posted October 23, 2007 Report Posted October 23, 2007 (edited) For a drag ported 4mm Stock cylinder Try out some 38mm PWKs.Alot of people run 35pwks with their 4mills But I think thats to small for a drag bike.Just my 2 cents tho.And that much comp. is hurting you on top by the way.Try going down to 175ish Edited October 23, 2007 by 06BaNsHeE Quote
brugal Posted October 23, 2007 Report Posted October 23, 2007 35mm is fine.I would invest in some pipes like CPIs. 210 compression wow Quote
locogato11283 Posted October 23, 2007 Report Posted October 23, 2007 i would run at least 35mm pwk if not 39mm pwk. if its a drag bike you need to get some cpi or shearer to really mkae the top end shine. also, 210 is killing your top end. you need to get it back down to 175 or so. it will rev a hell of a lot easier.. Quote
FASTOYS Posted October 23, 2007 Report Posted October 23, 2007 35s PWKs will work fine but 39PWKs on a drag motor will pick up hp and tq.! Quote
krauss4 Posted October 23, 2007 Author Report Posted October 23, 2007 my motor builder (dasa) said 210 is good for 110 race gas. but whats a good place to get pwk 35mm or 36mm for a good price besides ebay Quote
06BaNsHeE Posted October 24, 2007 Report Posted October 24, 2007 PM FASTOYS on here he Probably has the best prices.Hes a sponsor also.Click on the farmandsandtoys logo Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.