Jump to content

Recommended Posts

Posted

I won an auction on ebay that is a CFM ebay auction. Same phone number and paypal info as the CFM on here. He will no longer return my ebay messages or anything so I was just coming here to see what everybody elses experiences has been with him. I am fully aware CFM will read this post, and hopefully he will send my swinger out after seeing that I am extemley unhappy on here, as well as ebay. Any info anybody could get me about any experiences with this guy would be very helpful.

Posted

I have seen Scott on here recently, and he's posted a few times.

I know he went through a rough divorce....plenty on here can understand that.

 

That being said...he's posted he's ready to do biz again...and that past is behind him.

I called him at the number in that post within the last month or so...

 

Told him who I was, and another site I'm on, everything2stroke.com is looking for a swingarm and possible a arm or other fab builder to be on the "preferred" list for the site. Wasn't asking for a dime for sponsorship, I just wanted to feel him out...man to man, over the phone to see where his thoughts were.

 

(Yeah, I know how bad that sounds....oh well....)

 

 

Anyways, I was expecting at least a call back, even a PM saying sure, no, no thanks, piss off...something...

 

Nothing. NO PMs, no phone call, no nothing. So...either business must be too good he doesn't need to take on other work, or...he's truly not ready to start going down the right path....

 

I told one guy on that site to get an arm from him...and he was happy with it....too bad, good prices and quality work can go far in this biz....but a responsible businessman is needed first....

Posted

CFM here, just back from work...

 

For the original posted, PM me your info and I'll get it taken care of, thanks.

 

5150, You contacted me claiming you purchased one (from 16 months ago) and were politley asked to provide any shred if info on the sale. You cannot produce any, and my records show nothing. My offer still stands, produce any legit info and you will be refunded.

 

dajogejr, Buisness is slowley getting better, but I'm still a one man show at this point, hence the hard to get ahold of part. I estimate at least a 6-8 months before things are as they used to be..

 

Thanks

Posted

Pm sent...

 

Im not going to come on here to trash someone, I simply want my swinger. I understand that times can be rough, so thats why i am not going to come on here saying someone is a not a good guy to deal with. Like I said, I want my swing arm, and thats that.

Posted

Pay for a swingarm or a product, recieve a swingarm or product. That's the way buisness works.

 

I have the info in the PM and investigating what happened will be my first order of buisness when I get into work.

 

However I do have a laser tattoo removal appt tomorrow for this wedding band that I so stupidly got, so Thursday will be when that happenes.

 

Should you not hear from me by 2pmEST on that day, please call me on my personal phone number that I PM'ed you

 

The buisness number rings about every 10 minutes and alot of times I just can't get it.

 

Do I need a secretary, yes, can I afford one at this time, no. I need a welder first.

 

Thanks

Posted
CFM here, just back from work...

 

For the original posted, PM me your info and I'll get it taken care of, thanks.

 

5150, You contacted me claiming you purchased one (from 16 months ago) and were politley asked to provide any shred if info on the sale. You cannot produce any, and my records show nothing. My offer still stands, produce any legit info and you will be refunded.

 

dajogejr, Buisness is slowley getting better, but I'm still a one man show at this point, hence the hard to get ahold of part. I estimate at least a 6-8 months before things are as they used to be..

 

Thanks

 

That's fine Scott...but I called over a month ago. And I've sent a PM as well...

I don't expect an immediate response...but just a common courtesy call or return PM in the last MONTH or so would've been nice...even if it was to tell me what you just did here.

 

Best of luck with everything......

Posted

I won one of his +4" swingers a while back. It was about 4.5 degrees off center to the left.... no big deal. I got ahold of him and he sent me another... same thing. I ended up getting a modquad swinger instead. I got to talk to someone from the shop that was making them and I was told that the jig got set-up wrong and about 100 swingers got made crooked. Sux man.... but I never did get anything of use for my $399. I would still like to get that $$$ back someday. Or something at least....

Posted

CALL me.... Better yet PM me as I'm on almost every night.

 

I don't make any swingarms that go for 400 dollars, but call me and let's get this taken care of if you purchased a faulty product..

 

And yes, there was a batch that the jig was off due to operator error. It cost me a measily 20 freakin grand in product... since then there is a sign off sheet to check and re-calibrate the jig if needed after every 5th one..

 

But rest assured, he was there on Friday to collect his 600 dollar check... I felt like breaking his head with one of the arms...

 

That was about 8-10 months ago.

 

Thanks

Posted (edited)

yeah it was a while ago. Sorry to hear about all that $$$ going down the drain man. $399 was for the +4 and the carrier.... I used the carrier :biggrin: So I guess I lied about getting nothing for my $399. The carrier was awesome... twinrow and zerk fitting, nice!

 

Are you saying that I can send you back my swinger for something else or credit of some sort? Or $$$? $$$ would be nice... :happy:

Edited by TurboBanshee420

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...