Jump to content

Recommended Posts

Posted

I have an 01 banshee i have a k&n filter with no air box, t-5 pipes, and I have rejetted it with 280's. its seems like i should have a lil more bottom end through all the gears but the worst is sixth I can have it pinned in fifth and as soon as I hit sithc it falls on its face. thinkin about putting some 270's in but not sure where to start. I am running amzoil at 80:1 any help would b great!

Posted

when i was running close to the same setup on stock carbs, near sea level i ran 310 mains and was a tad rich... your running pretty lean with 280's

 

while you have your carbs open see what pilot and needle you have in there... also what notch the needle is on

Posted (edited)

isnt amsoil a full synthetic? they claim that you can run it out to 100:1 or something rediculose like that... ill just stick with what i got :)

 

edit: actually i just looked it up and they say 50:1 so not all that crazy i guess..

Edited by Bansh-eman
Posted

If I remember they recommend AMSOil Interceptor at 50:1 and AMSOil Dominator at 100:1. I usually run the Interceptor at 40:1. And they're both fully synthetic.

 

Correct me if I'm wrong on that, it's just off the top of my head.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...