bastinm Posted October 2, 2007 Report Posted October 2, 2007 I have an 01 banshee i have a k&n filter with no air box, t-5 pipes, and I have rejetted it with 280's. its seems like i should have a lil more bottom end through all the gears but the worst is sixth I can have it pinned in fifth and as soon as I hit sithc it falls on its face. thinkin about putting some 270's in but not sure where to start. I am running amzoil at 80:1 any help would b great! Quote
Snopczynski Posted October 2, 2007 Report Posted October 2, 2007 bump up the jets and see if it gets better. Or richen the needles. It sounds to me like its lean. Quote
sredish Posted October 2, 2007 Report Posted October 2, 2007 try some 300's. it's leaning out from the extra load of 6th gear. Quote
Bansh-eman Posted October 2, 2007 Report Posted October 2, 2007 when i was running close to the same setup on stock carbs, near sea level i ran 310 mains and was a tad rich... your running pretty lean with 280's while you have your carbs open see what pilot and needle you have in there... also what notch the needle is on Quote
shee4speed Posted October 2, 2007 Report Posted October 2, 2007 Whats this dudes elevation? That might be okay with 280 @ 7000 ft. :shrug: Quote
Snopczynski Posted October 2, 2007 Report Posted October 2, 2007 Whats this dudes elevation? That might be okay with 280 @ 7000 ft. :shrug: Not if he is running amsoil at 80:1 Quote
bastinm Posted October 2, 2007 Author Report Posted October 2, 2007 i am at sea level pretty much 500 at most. Quote
Snopczynski Posted October 2, 2007 Report Posted October 2, 2007 whats the deal with the 80:1 amsoil? Thats way lean for any normal oil that I know about. Quote
Bansh-eman Posted October 2, 2007 Report Posted October 2, 2007 (edited) isnt amsoil a full synthetic? they claim that you can run it out to 100:1 or something rediculose like that... ill just stick with what i got edit: actually i just looked it up and they say 50:1 so not all that crazy i guess.. Edited October 2, 2007 by Bansh-eman Quote
bastinm Posted October 2, 2007 Author Report Posted October 2, 2007 they say you can run 100:1. I actually know a few ppl that have ran it like that for years and never had a problem. I know it sounds a lil sketchy but true Quote
Bansh-eman Posted October 2, 2007 Report Posted October 2, 2007 which one you running? i jut looked at thier site and the 2 common ones are listed as 50:1 premix or injected Quote
bonbon Posted October 2, 2007 Report Posted October 2, 2007 If I remember they recommend AMSOil Interceptor at 50:1 and AMSOil Dominator at 100:1. I usually run the Interceptor at 40:1. And they're both fully synthetic. Correct me if I'm wrong on that, it's just off the top of my head. Quote
bastinm Posted October 2, 2007 Author Report Posted October 2, 2007 I am running the saber pro. due to the the fact its hard to find and i can seem to locate the dominator all the time. the saber seems to smoke a lil if i run it 50:1. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.