Still won't start.

[Olds Eddie]

I have compression, fuel and spark. The spark is small but white. It dosen't seem to occur every kick but it does spark. I have replaced the coil and plug caps as well as plugs. I have verified the pulse coil gap as well as checking the resistance of both the source coil and the pulse coil per the ignition FAQ. It just dosen't seem to be firing all the time- only occasionally. What do some of you Guru's think I am missing?

[kawiking]

what kind of shape is your wiring harness,my buddies shee did that .ended up being a short in harness.

[Olds Eddie]

what kind of shape is your wiring harness,my buddies shee did that .ended up being a short in harness.

 

Thats what started it all. I cleaned up the wiring harness to remove the tors wiring. It was running fine before I did that so the firest thing I did was take the harness back apart to re-check the wiring. I guess I'll do it again as I have done everything but replace the CDI box, pulse coil, stator and flywheel.

[Olds Eddie]

Thats what started it all. I cleaned up the wiring harness to remove the tors wiring. It was running fine before I did that so the firest thing I did was take the harness back apart to re-check the wiring. I guess I'll do it again as I have done everything but replace the CDI box, pulse coil, stator and flywheel.

Fixed at last! I re-wired the shee with the factory manual as a guide so when I took it back apart to re-check I used the diagram for the simplified harness in the back of the 'Wiring FAQ' on BansheeHq. I had thought that the key switch wire was like the kill switch circuit so I had left the red/black loose from the ground. This site is awesome!