fast660r Posted August 7, 2007 Report Posted August 7, 2007 (edited) Alright you guys helped me through the TORS mess now i am calling on you once again. My sons 97 banshee has been running great until Saturday, he stopped and shut it off and it will not kick start at all. It will however pull start but doesn't have half the power it usually does. Carbs are clean and flowing fine, vacuum tubes good and connected. We were at the mx race and someone said it was the stator. Need help quick, races are thursday night. Edited August 7, 2007 by fast660r Quote
NYUK Posted August 7, 2007 Report Posted August 7, 2007 a compression check would be in order 1 st. Quote
dynodon Posted August 7, 2007 Report Posted August 7, 2007 a compression check would be in order 1 st. Agreed!!!!!!! Quote
fast660r Posted August 7, 2007 Author Report Posted August 7, 2007 Agreed!!!!!!! OK, what kinda of compression should this bike generally have ? Quote
SAVAGE420 Posted August 7, 2007 Report Posted August 7, 2007 (edited) Some wont agree, but i say 100PSI per side at the very least, then redo the top end. Before my last rebuild my right side was 122 and the left was 54(due to that piston starting to come apart) But man did it still run like a raped ape :cool: Edited August 7, 2007 by savage420 Quote
dynodon Posted August 7, 2007 Report Posted August 7, 2007 Depends on what the motor is, Stock or after market cylinders. Quote
fast660r Posted August 7, 2007 Author Report Posted August 7, 2007 There stock man. verdict is in no comp. NEED PISTONS AND RINGS, cylinders mic up at 64.75 and look good. I will run a quick hone through them. Where can I get reasonable piston kits ASAP. We only have 3 races left for the year. Quote
BansheeDan Posted August 7, 2007 Report Posted August 7, 2007 verdict is in no comp. NEED PISTONS AND RINGS, cylinders mic up at 64.75 and look good. I will run a quick hone through them. Where can I get reasonable piston kits ASAP. We only have 3 races left for the year. ebay... i got my weisco kit a few months back forlike 120.00 Dan Quote
okbeast Posted August 7, 2007 Report Posted August 7, 2007 Rockymountainatv.com magicracing.com Jim at Passion sells the whole kit cheap as well Then I'd try ebay. Quote
dynodon Posted August 7, 2007 Report Posted August 7, 2007 Yep, all the above, or TDR has them in stock also. I believe the last time I ordered through him they were like 180.00 overnighted to my door though. Quote
SAVAGE420 Posted August 7, 2007 Report Posted August 7, 2007 (edited) http://cgi.ebay.ca/YAMAHA-BANSHEE-WISECO-P...1QQcmdZViewItem Ask for the size you need. Just a click away :biggrin: Edit..Here it is. http://cgi.ebay.ca/YAMAHA-BANSHEE-WISECO-P...oQQcmdZViewItem Edited August 7, 2007 by savage420 Quote
fast660r Posted August 7, 2007 Author Report Posted August 7, 2007 http://cgi.ebay.ca/YAMAHA-BANSHEE-WISECO-P...1QQcmdZViewItem Ask for the size you need. Just a click away :biggrin: Edit..Here it is. http://cgi.ebay.ca/YAMAHA-BANSHEE-WISECO-P...oQQcmdZViewItem Thanks, you guys are the shit as always. Do think the pistons could be just reringed? Quote
SAVAGE420 Posted August 7, 2007 Report Posted August 7, 2007 Thanks, you guys are the shit as always.Do think the pistons could be just reringed? Buy the kit, save yourself the headache! Quote
racer Posted August 7, 2007 Report Posted August 7, 2007 Why is this in 'for sale' in case you couldn't fix it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.