87banshee_rider Posted August 4, 2007 Report Posted August 4, 2007 Ok i have this bogging problem and Im pretty sure its just the first part of the throttle that does it so Im guessing its my pilots. My bike starts perfectly, its really loaded up when it starts and wont clean out till i take it down the road and burn it out and when i go back to idle it only idles for a second and then starts loading up again. It just seems really boggy on the bottom end but once i get it wound out it runs about 95 percent i would say. The carbs have 330 mains and i think 35 pilots. The plugs have good color but when i stop and check the plug they are wet. Im thinking my pilots are way to big but Im sure you guys know way more than me. Im not very good at this yet so any help is appreciated Quote
peak-j Posted August 4, 2007 Report Posted August 4, 2007 What all mods do you have done to it? Quote
87banshee_rider Posted August 6, 2007 Author Report Posted August 6, 2007 its just a 4 mil setup with cpi's. i thought that was WAY to big to but thats just what tdr told me to start with. what should i go to? probably 27.5 would be good hey? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.