jetting

[macgillivary]

Hey I know its the wrong forum, had this topic on the jetting forum for a day, no replies, i know this section is more popular so i tryed in here

 

Anyways I got a set of pod filters for my banshee but dont know where to start for a main jet.

 

I got fmf pipes, shaved head, wolf cdi, mild port, stock carbs, everything else stock, at sea level

 

I was thinking like a 320-340ish or so but I wanted to ask before I go wasting money on jets, tight on money these days lol.

Thanks

[David Keith]

Hey I know its the wrong forum, had this topic on the jetting forum for a day, no replies, i know this section is more popular so i tryed in here

 

Anyways I got a set of pod filters for my banshee but dont know where to start for a main jet.

 

I got fmf pipes, shaved head, wolf cdi, mild port, stock carbs, everything else stock, at sea level

 

I was thinking like a 320-340ish or so but I wanted to ask before I go wasting money on jets, tight on money these days lol.

Thanks

 

 

Yes, 340 would be a good starting size. Better to be just a bit rich as opposed to too lean.

[Pardee208]

Yes, 340 would be a good starting size. Better to be just a bit rich as opposed to too lean.

 

 

 

i put 300s in with my pods with t5's and it ran so rich it fell on its face, and was fallowing plugs left and right. I ended up putting 270s in and it runs good now.. i guess every machine is different

[375hp banshees]

Hey I know its the wrong forum, had this topic on the jetting forum for a day, no replies, i know this section is more popular so i tryed in here

 

Anyways I got a set of pod filters for my banshee but dont know where to start for a main jet.

 

I got fmf pipes, shaved head, wolf cdi, mild port, stock carbs, everything else stock, at sea level

 

I was thinking like a 320-340ish or so but I wanted to ask before I go wasting money on jets, tight on money these days lol.

Thanks

 

every shee is different, i'm at 360 at sea level ...340 should be close enough to do a plug chop

 

what are you switching form filter & jet wise?

[375hp banshees]

Hey I know its the wrong forum, had this topic on the jetting forum for a day, no replies, i know this section is more popular so i tryed in here

 

Anyways I got a set of pod filters for my banshee but dont know where to start for a main jet.

 

I got fmf pipes, shaved head, wolf cdi, mild port, stock carbs, everything else stock, at sea level

 

I was thinking like a 320-340ish or so but I wanted to ask before I go wasting money on jets, tight on money these days lol.

Thanks

 

every shee is different, i'm at 360 at sea level ...340 should be close enough to do a plug chop

 

what are you switching from filter & jet wise?

[375hp banshees]

Hey I know its the wrong forum, had this topic on the jetting forum for a day, no replies, i know this section is more popular so i tryed in here

 

Anyways I got a set of pod filters for my banshee but dont know where to start for a main jet.

 

I got fmf pipes, shaved head, wolf cdi, mild port, stock carbs, everything else stock, at sea level

 

I was thinking like a 320-340ish or so but I wanted to ask before I go wasting money on jets, tight on money these days lol.

Thanks

 

every shee is different, i'm at 360 at sea level ...340 should be close enough to do a plug chop

 

what are you switching from filter & jet wise?