i want to high life

[chronicwatson]

well any way i want to make it so i can turn just my high beams on and off i see a blue and yellow wire going to the swith then a green wire goes to the lights and a yellow go to the light any way if any of you could help that would be great thanks

[Bansh-eman]

from the switch you need the yellow and blue ( high beams and tail light ) on one side of your switch, and the yellow with red stripe on the other ( your auxillery power )

 

from the lights your need yellow and black. yellow is high beams black is ground.

 

all the others can be disconnected. i put a 2 stage toggle swicth on my bike and removed the on/off switch and replaced it with a CR250 kill switch.