freddy Posted June 22, 2007 Report Posted June 22, 2007 ok the problem is i bought a dyna fs ignition on ebay and the guy didnt put wat years it would fit, and whenii recieved it, turns out it doesnt fit my banshee, the plugs are different, theyre like my buddies banshee and his is an 89? now i looked at his wiring and i can match up all the cables to fit perfectly except for one, its a green with a yellow stripe on it, does anyone know wat this wires for, and if maybe i can just leave it without connecting it, can someone please help, thanks in advance. Quote
Speed freak Posted June 22, 2007 Report Posted June 22, 2007 ok the problem is i bought a dyna fs ignition on ebay and the guy didnt put wat years it would fit, and whenii recieved it, turns out it doesnt fit my banshee, the plugs are different, theyre like my buddies banshee and his is an 89? now i looked at his wiring and i can match up all the cables to fit perfectly except for one, its a green with a yellow stripe on it, does anyone know wat this wires for, and if maybe i can just leave it without connecting it, can someone please help, thanks in advance. I dont know if it will work or not ,,if you cant find any info here just PM me I have a complete harness of of my 06 I will send you ..I dont need it any more Quote
BenBB Posted June 23, 2007 Report Posted June 23, 2007 I ran a Dyna for like a '97-up Banshee on my '96; like you said the connectors are different and I had one wire left over (think mine was purple, on the CDI side not the harness side). It worked perfectly I just matched up the wires and taped that one off, I think Brad from Dynatek posted here a few times that it had something to do with the e-brake switch of the TORS. Anyway all you need to do is take the pins out of the connectors on your old CDI (and the new one) and put your old connectors (the plastic part) on the new CDI so it'll plug into your harness; write down what goes where and make double sure the colors match, this is all you need for it to run and they should be the same color on both sides of the connector (i.e. harness side and CDI side): Red from stator to CDI Green from stator to CDI Red/White from stator to CDI Green/White from stator to CDI Black from stator/ground to CDI Orange from CDI to coil Brown/Red from CDI to ignition key switch (if ya got one, if not it needs to be grounded to run) Black/White from CDI to handlebar kill switch (opposite of key-this one grounded is "off") Good luck... Quote
freddy Posted June 23, 2007 Author Report Posted June 23, 2007 I ran a Dyna for like a '97-up Banshee on my '96; like you said the connectors are different and I had one wire left over (think mine was purple, on the CDI side not the harness side). It worked perfectly I just matched up the wires and taped that one off, I think Brad from Dynatek posted here a few times that it had something to do with the e-brake switch of the TORS. Anyway all you need to do is take the pins out of the connectors on your old CDI (and the new one) and put your old connectors (the plastic part) on the new CDI so it'll plug into your harness; write down what goes where and make double sure the colors match, this is all you need for it to run and they should be the same color on both sides of the connector (i.e. harness side and CDI side): Red from stator to CDI Green from stator to CDI Red/White from stator to CDI Green/White from stator to CDI Black from stator/ground to CDI Orange from CDI to coil Brown/Red from CDI to ignition key switch (if ya got one, if not it needs to be grounded to run) Black/White from CDI to handlebar kill switch (opposite of key-this one grounded is "off") Good luck... ok i dont know wat year my dyna fs box is for but it fit like a glove on my buddies banshee and his is an 89, on mine though the plugs or more newer, mines an 05 and the wires are different?? not even same color as the dyna fs, the box has apurple one, yellow, black with yellow stripe, black with white stripe, green with white stripe, pink with blue stripe, pink with white stripe, and an all black one. does anyone have one same year or close enough witha dyna fs box that will help me match them up to my harness?? i would appreciate it so much thanks! im so frustrated already. Quote
freddy Posted June 23, 2007 Author Report Posted June 23, 2007 I ran a Dyna for like a '97-up Banshee on my '96; like you said the connectors are different and I had one wire left over (think mine was purple, on the CDI side not the harness side). It worked perfectly I just matched up the wires and taped that one off, I think Brad from Dynatek posted here a few times that it had something to do with the e-brake switch of the TORS. Anyway all you need to do is take the pins out of the connectors on your old CDI (and the new one) and put your old connectors (the plastic part) on the new CDI so it'll plug into your harness; write down what goes where and make double sure the colors match, this is all you need for it to run and they should be the same color on both sides of the connector (i.e. harness side and CDI side): Red from stator to CDI Green from stator to CDI Red/White from stator to CDI Green/White from stator to CDI Black from stator/ground to CDI Orange from CDI to coil Brown/Red from CDI to ignition key switch (if ya got one, if not it needs to be grounded to run) Black/White from CDI to handlebar kill switch (opposite of key-this one grounded is "off") Good luck... I JUST NEED TO KNOW WAT COLORS ON THE DYNA FS BOX GO WITH THE COLORS ON MY HARNESS< THEY ARENT THE SAME SO I CANT JUST PASTE THEM? PLEASE HELP Quote
Snopczynski Posted June 23, 2007 Report Posted June 23, 2007 That extra wire (green/yellow) is the emergency brake rev limiter. I believe it needs to be grounded to run right. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.