chronicwatson Posted June 20, 2007 Report Posted June 20, 2007 i'm in the middle of putting my engine back togeather and i'm not sure what way the seal on the fly wheel side of the crank goes in it's not a yamaha seal so there is no green marking to tell me what side is what. the one side has a fatter lip with letters and numbers on it and little ridges in the center. The other side has a thinner lip with no letters or numbers on it but the center is smooth with the bearing info on it if any one can help me with this i need to know what way it goes in plz help me. chronicwatson Quote
chronicwatson Posted June 20, 2007 Author Report Posted June 20, 2007 come on guys some one has to know what way the right way is ? Quote
swrbansheeboy Posted June 20, 2007 Report Posted June 20, 2007 heres mine, i always put the springs on the outside.... Quote
chronicwatson Posted June 20, 2007 Author Report Posted June 20, 2007 heres mine, i always put the springs on the outside.... is the inside smooth or is there little notches it looks smooth Quote
swrbansheeboy Posted June 22, 2007 Report Posted June 22, 2007 maybe this will help you out... inside (crank side) outside (flywheel side) Quote
chronicwatson Posted June 22, 2007 Author Report Posted June 22, 2007 maybe this will help you out... inside (crank side) outside (flywheel side) hey man thanks alot i already got it but now i know for sure thanks alot chronic watson Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.