first-banshee Posted June 16, 2007 Report Posted June 16, 2007 just put a new 7mil stroker together & it wont fire. I bought all the parts from a friend & it was a running combination. I dont have any spark. I've checked continuity of stator & wires to connector, checked the operation of the pickup. Pickup is gapped at .020. Removed flywheel & made sure the woodruff key didnt push out. I'm lost, dont think i would have lost a coil or cdi box since I tore it apart last week. Any ideas? Going to florence or next weekend, need to get her going. Any help is appreciated. Quote
MILO Posted June 16, 2007 Report Posted June 16, 2007 i'm no banshee electrician, but are you sure it's not just in your key switch or kill switch wires? start with the simple things and go from there. it sounds like you've already eliminated the more complex electrical components. Quote
first-banshee Posted June 16, 2007 Author Report Posted June 16, 2007 i'm no banshee electrician, but are you sure it's not just in your key switch or kill switch wires? start with the simple things and go from there. it sounds like you've already eliminated the more complex electrical components. i dont have a key switch. I took the on/off switch apart, checked it & continuity to its connector, all seems ok. I changed handlebars while the motor was torn down, so the on/off switch is the only thing electrical that got touched, but it looks ok. Quote
98'banshee Posted June 16, 2007 Report Posted June 16, 2007 wait a minute. Did you tie the wires together???? that would be your reason. together grounds the electricity out and kills the motor. Had the same problem with my sled, have a teather so y a kill switch??? and wired it together and 20 pulls later I pulled the wires apart and wala first pull like it should. Quote
first-banshee Posted June 16, 2007 Author Report Posted June 16, 2007 wait a minute. Did you tie the wires together???? that would be your reason. together grounds the electricity out and kills the motor. Had the same problem with my sled, have a teather so y a kill switch??? and wired it together and 20 pulls later I pulled the wires apart and wala first pull like it should. i figured it out, closed the gap on the pickup a little & she fired right up. thanks for your replies, i appreciate the help... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.