alignment specks

[floydfan_90]

I need alignment specks for a banshee caster, camber, toe and ideal Ackerman angle (toe out on turn).

[letsgetthisdone]

do you have adjustable a-arms? cuz if you don't, you can only adjust toe-in/out. And ackerman isn't adjustable on the banshee, just to let you know.

[FireHead]

I need alignment specks for a banshee caster, camber, toe and ideal Ackerman angle (toe out on turn).

What are you looking to do here? Caster and Ackerman might be a bit of a challenge for most folks with a normal garage and a basic set of tools. :geek:

[Bansh-eman]

get your self a meter stick. assuming you have adjustable arms... set your pitch and toe to even front and back

some guys run -1 in the front but i like mine even

 

set your caster /camber to be minus one on top so they should be / \ very slightly

 

EDIT: oh the ezest part to messure is from center of tire to center of tire... unless you have an adjustable stick you can run from sidewall to sidewall.

Edited June 14, 2007 by Bansh-eman

[FireHead]

EDIT: oh the ezest part to messure is from center of tire to center of tire...

 

Ezest.........really? That's an awesome new word you invented there. :laugh: