Banshee Part Out

[Lethaface]

Ok here goes.. I will try to keep this as up to date as possible.. And do my best to awnser questions 2-3 times a day.. Everything is open to offers but PREFER PAYPAL! Will make sure everything goes out in a timely manner..

 

1. Banshee cases in good shape No cracks or anything like that.. $200 Shipped OBO

2. Set of Standard Bore 64mm cylinders That needs bored.. $200 shipped OBO

3. Complete transmission.. COmes with everything tranny related $150 shipped OBO

4. Complete clutch set up Inner, Outter, pressure plate and springs $100 shipped OBO

5. Clutch cover with impeller Will polish for a extra $50(7 days extra) $50 shipped OBO

6. Complete set of stock wheels in very good shape! $100 shipped OBO

7. UPP aftermarket chain(the one that goes on swingarm bolt) slide and wheel $30 shipped OBO

8. Axle, Carrier and hubs in good shape.. $115 shipped OBO

9. Complete set of shocks(fronts have some paint on them Still look good) $120 shipped OBO

10. Stock radiator in good shape.. SOme fins need bent back but still good $30 shipped OBO

11. Some type of aftermarket brake light.. Mounts using the grab bar bolts $20 shipped OBO

12. Stock steering stem in good shape Comes with all mounting hardware $40 shipped OBO

13. DG Baja swingarm skid.. One small section in could be welded but still functional $35 shipped OBO

14. Stock swingarm with inner sleeve and bolt Straight!! $40 shipped OBO

15. Front brake system.. Lever, Lines and calipers $65 shipped OBO

16. Complete a arm system.. Comes with Arms, Hubs, and bolts.. STRAIGHT ARMS $120 shipped OBO

17. FMF fatty pipes.. These need painted with hi temp.. They have no dents at all! $175 shipped OBO

18. Complete plastic in white.. Has some scratches.. Would prefer to race cut b4 ship We'll talk OBO lol

19. DG grab bar.. Painted gold Needs stripped and a small weld.. Straight $35 shipped

20. BIG box of left over bolts.. Also comes with motor mounts, pipe hangers and a few $40 shipped

other things..

[kaotik1]

what about a rear brake set-up?

[Lethaface]

Kaotic, I have the rear brake petal and master cylinder set up but i don't have the caliper.. It sold this morning.. If your interested in the petal, master cylinder though you can have it for $30 shipped..

 

 

 

******TRANSMISSION IS SOLD!!*******

[Lethaface]

Here is some pics.. Apparently the previous owner thought chrome came in a can lol.. I have messed with them a little bit and it comes off pretty easily.. Parts have been priced accordinly do to that fact..

 

Plastics are in pretty good shape..They have a flame graphic kit on them.. there is some scratches in it though but no bends or anything..The guy added a set of headlights which will come with the plastics but if not used there will be 4 smal holes by the radiator.. I would really prefer to race cut at least the front before shipping as i took a $70 hit last time.. I will ship whatever to the moon as long as the buyer pays for it though

 

Some of these parts need cleaned but they're in good shape..

 

Radiator

 

Thumb Throttle

 

Actually a pretty cool brake light.. May need a bulb..

 

Steering stem

 

Dirty but not beat up.. The small crack is in the crease

[Lethaface]

2 swingers.. One comes with Sleeve, bolt and dogbone.. Other can be had for the price of shipping..

 

The wheels.. Tires won't be included as they are shitty..

 

Dirty but straight.. It's actually in much better shape than the picture depicts.. I will clean it up a bit before i mail it..

 

Front brake system

 

Chain slide and roller

 

Paint can be seen on front shocks.. Doesn't look bad but thought i would at least mention it.. They are not blown or anything and all the rear adjustments still work..

 

Front a arms, hubs and disks.. They are in good shape but will need painted..

 

Same deal with these.. They are in very good shape physicly just a little on the ugly side.. A little sanding and paint would do wonders for these things.. They are fattys with silencers with no dents cracks or rewelds.. Also has proper silencer mounting hardware..

Edited May 16, 2007 by Lethaface

[Lethaface]

More groooovy paint lol.. Some aircraft stripper and this would be a slick bumper.. Could use a weld but it's not a nessesity.. It is straight however..

 

Box O bolts

 

Clutch cover..

[Lethaface]

A-arms and steering stem sold!!

[Canadarider]

Will you sell the rad and tank cover ???

[Lethaface]

Yeah that would be fine bro.. $50 shipped to canada

[SoCalinIt]

PM sent Jeremy!

[Lethaface]

Guys i'm off to work.. If anybody needs to get ahold of me for anything feel free to call me at 1-931-787-4022 I'll be up till about 2am tonight so don't hesitate if it's late..

 

 

 

 

Cases and cylinders are sold!!!

Transmission is sold

Aarms and steering stem are sold!!

[okbeast]

Can you get some up-close pics of the rims to [email protected] please. I'm lookin for some that aren't scratched around the edge to get powdercoated. Thanks!

[96_banshee_96]

How much for the rear hubs??? Do you have the nuts for them are they the newer bolt pattern?

Edited May 16, 2007 by 96_banshee_96

[dajogejr]

Guys i'm off to work.. If anybody needs to get ahold of me for anything feel free to call me at 1-931-787-4022 I'll be up till about 2am tonight so don't hesitate if it's late..

Cases and cylinders are sold!!!

Transmission is sold

Aarms and steering stem are sold!!

 

Jer...see if you can sell the cases and cylinder to someone else...sorry bro. My bud and I got ourselves in a mishap.

If you can't find anyone by Friday, I'll still take 'em...

 

Sorry man...got a trip coming up and a few things came up we didn't account for (two guys backed out on us...)

 

I'll try to call you later to discuss...I don't want to leave you high and dry...

[Lethaface]

OKbeast, They are in good shape but they do have some scuffing on the lips..

 

96, The hubs are going with the axle but thank you anyways.. They are pending payment atm anyways.. Thanks though

 

NP dave :thumbsup: