Banshee drag times? help?

[blaster205]

ok, anyone know what a 1/8 mile drag would be for time and speed on a stock shee? or a piped one? or yours? tell your mods...if ou do have the time...

 

 

thanks, my engines out for a P&P and possibly a 3mil stroker...modded head, .020 bore, piston, rebuild on the bottom end...thanks.

 

 

heres a couple videos on a blaster done just like mine will be...with 21"s and 14/40 gearing on his blaster.. or 14/38...

 

 

Banshee vs/ Blaster

http://media.putfile.com/mike-2-45

 

 

blaster vs. blaster

http://media.putfile.com/mike6

http://media.putfile.com/mike4

http://media.putfile.com/mike3

http://media.putfile.com/mike5best

[blaster205]

some times on his blaster

 

60ft. 1.971sec.

 

1/8mile 9.096 @ 70.31mph

 

newer times...

RT: .693

60': 1.889

MPH: 70.75

ET: 8.981

[LIM_Whiteboy4life]

Looks like that shee missed a shift or he's a tard.....

There's a Video of a shee on here with bolt ons that ran a 9.6 @ 71mph forgot who it was tho....

[Master of Faster]

My trail Banshee goes 8.4 @ 76mph in the 1/8 with a trail port and headwork, and that is geared for the full 1/4.

 

You can't see the board in this vid but I ran a 8.5 this time.

 

Banshee VS. YFZ 450 ----> http://media.putfile.com/Banshee-vs-YFZ-45040

 

I ended up running a 13.62 @ 89.7mph in the 1/4 with 16/41 gears but I ran out of gear about 300' early, should drop a couple more tenths this year with the proper gearing and maybe some tires.

Edited May 16, 2007 by Master of Faster