blaster205 Posted May 16, 2007 Report Posted May 16, 2007 ok, anyone know what a 1/8 mile drag would be for time and speed on a stock shee? or a piped one? or yours? tell your mods...if ou do have the time... thanks, my engines out for a P&P and possibly a 3mil stroker...modded head, .020 bore, piston, rebuild on the bottom end...thanks. heres a couple videos on a blaster done just like mine will be...with 21"s and 14/40 gearing on his blaster.. or 14/38... Banshee vs/ Blaster http://media.putfile.com/mike-2-45 blaster vs. blaster http://media.putfile.com/mike6 http://media.putfile.com/mike4 http://media.putfile.com/mike3 http://media.putfile.com/mike5best Quote
blaster205 Posted May 16, 2007 Author Report Posted May 16, 2007 some times on his blaster 60ft. 1.971sec. 1/8mile 9.096 @ 70.31mph newer times... RT: .693 60': 1.889 MPH: 70.75 ET: 8.981 Quote
LIM_Whiteboy4life Posted May 16, 2007 Report Posted May 16, 2007 Looks like that shee missed a shift or he's a tard..... There's a Video of a shee on here with bolt ons that ran a 9.6 @ 71mph forgot who it was tho.... Quote
Master of Faster Posted May 16, 2007 Report Posted May 16, 2007 (edited) My trail Banshee goes 8.4 @ 76mph in the 1/8 with a trail port and headwork, and that is geared for the full 1/4. You can't see the board in this vid but I ran a 8.5 this time. Banshee VS. YFZ 450 ----> http://media.putfile.com/Banshee-vs-YFZ-45040 I ended up running a 13.62 @ 89.7mph in the 1/4 with 16/41 gears but I ran out of gear about 300' early, should drop a couple more tenths this year with the proper gearing and maybe some tires. Edited May 16, 2007 by Master of Faster Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.