kawiking Posted October 27, 2007 Author Report Share Posted October 27, 2007 does anyone know what the stock needle is in a set of 34 pj's ?????? i was also wondering going with more compression would it help run the out of frames i have ? like i said, i have 140 on a drag port (stock cyln ) and i got a set of 18-17 domes. shooting for around 165 range. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted October 27, 2007 Report Share Posted October 27, 2007 well ive always wanted a set of out of frame pipes .i had a drag port done on my bike(look at profile) stock with bolt ons.added a set of 34 pjs and a used set of cpi out of frames.i knew my jetting was rich on top,went to little sahara oklahoma this week and had it dynoed. carbs had 152 stock in them-i put 148's in before i left . my buddies shee is just like mine with out the porting ,pipes and carbs. he pulled a 55 !!! the owner of the dyno said he could tell mine was bad rich before we started.it pulled a 53!!!! my 2 buddies ride the same and you can switch them on both bikes and mine always has at least a 2 bike lead. i went and dropped it to 140 and put a set of fmf fatties and the damn thing pulled 58..... did i not have anough motor for the out of frames ??? the dyno guy said a set of cpi inframes would help out alot !!! anyone have any advise for me ???? hate to spend 500 on a set of cpi in frames and them run like crap. why were the out of frames hurting me ??????? thanks for the help !! im not a bid dyno num guy,i wanted my jetting close ........ well if you decide to go that way i have a nice set of cp small bore inframes i was using on my cub motor.. i am going back to woods riding so the cub is for sale also.. i will make someone a great deal on it.. i had the cub polished also.. it looks sweet.. i have a polished cub cylinder, head with big bore domes, and pistons.. its in great shape with very little time on it( just this summer about 5 rides) make me an offer Quote Link to comment Share on other sites More sharing options...
kawiking Posted October 27, 2007 Author Report Share Posted October 27, 2007 thanks sheerider..... i just bought a set off of badshee... id rather run out of frames but i couldnt get it tuned right. just wouldnt pull hard at top end. the damn fmf's pull harder !!! i hope these inframe give me what i want. going to try some 18 domes first. how it sits now it pulls 2nd hard with a set of 22--- 9 paddle sls.. at 140lbs--aiming for 160-165 ... Quote Link to comment Share on other sites More sharing options...
FireHead Posted October 28, 2007 Report Share Posted October 28, 2007 reliable dynojet I am pretty sure it is against the law in the 49 contiguous states and guam to use those two words in the same post. :geek: Quote Link to comment Share on other sites More sharing options...
kawiking Posted October 29, 2007 Author Report Share Posted October 29, 2007 lol....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.