alisn4x4 Posted April 30, 2007 Report Posted April 30, 2007 ok so imma start off fresh with a post on what i have left. parts are located in San Diego CA. i prefer local pickup for the large items tho shipping is possible. PM me your offers on what you'd like. - J-arm frame with NIB a-arm conversion kit. no cracks. no title tho had the numbers run and has no back fee's register it as a green sticker bike no sweat. - Complete motor. includes everything in the bottom end, clutch and all the covers. crank is stock with maybe 1 hour on it (if that) just resealed the bottom end. trans in PERFECT shape! (i have pictures of the gears before i sealed it) Jug's need to be bored out to match the 65MM pistons. i have a NIB wiseco pro-lite kit from Magic Racing. ($170 bux there) jug's have not been ported. so have at it. has stock intake with NIP boysen dual stage reeds not even installed. THIS IS FOR A NEAR COMPLETE MOTOR. ALL YOU NEED IS TO HAVE THE CYLINDERS BORED TO MATCH THE PISTON KIT, ASSEMBLE THE TOP END, SLAP YOUR CARB SETUP ON IT AND IT RUNS! - FMF Fattie pipe's and HIGHLY polished silencers (power core 2) pipe's have light rust int he usual place behind the pipe's where it dont show. otherwise in good shape, no ding's, no dents. silencers are polished to a mirror like shine, no dent's either. - Coffman raw pipe's and silencers. (mid-top end) pipe's are raw metal right now, no ding's or dent's. silencer's could use a clean up but are ding and dent free also. - complete stock rear axle with carrier, brake disk, hub, and sproket hub. no outter hubs. threads and splines on the axle are in good shape. - rear shock linkage. complete upper and lower linkage. lower dogbone is polished. - seat in perfect shape. 91 red, was reupholstered about 1 yar ago. - radiator in perfecdt shape. no dents. all fins are in great shape, inside is clean with radiator cap. - stock steering stem. good shape, straight. - front hubs, calipers, and spindles. in good shape. could use a going through. - stock thumb throttle. good shape. - front brake cylinder. good shape. i think thats all i got unless i run into any more parts i forgot to mention. PM me your offers for the parts you want. MOTOR IS SOLD COMPLETE AND NOT GONNA PART IT OUT SO PLEASE DONT ASK. pictures are available for serious inqueries ONLY. Quote
WALLACE84 Posted April 30, 2007 Report Posted April 30, 2007 Price and pics of the coffmans to [email protected] please. Thanks -Dan Quote
silver600zl Posted April 30, 2007 Report Posted April 30, 2007 also interested in the coffmans....pm a price and pics..thanks Quote
alisn4x4 Posted April 30, 2007 Author Report Posted April 30, 2007 also interested in the coffmans....pm a price and pics..thanks emails sent. Quote
curve10780 Posted May 1, 2007 Report Posted May 1, 2007 I would like the price of the frame shipped to 71241 I don't need the conversion. Quote
alisn4x4 Posted May 2, 2007 Author Report Posted May 2, 2007 Price on complete motor? curve- ill go investigate a shipping price for it and go from there. duner440- you have PM Quote
curve10780 Posted May 2, 2007 Report Posted May 2, 2007 Thanks and to maybe help you I just sent a blaster frame ups from Louisiana to Washington and it was like $62 to ship normal. curve- ill go investigate a shipping price for it and go from there. duner440- you have PM Quote
tedd1 Posted May 2, 2007 Report Posted May 2, 2007 I am interested in the axles and the Fatties, please...pm? Quote
alisn4x4 Posted May 2, 2007 Author Report Posted May 2, 2007 tedd1 - you have PM buddy. Thanks and to maybe help you I just sent a blaster frame ups from Louisiana to Washington and it was like $62 to ship normal. who did you use to ship and how did you ship the frame?? never shipped anything this big so i have no clue. PM me and we'll figure out how to ship this thing and get you a price on it. thanks. Quote
Wertzy Posted May 2, 2007 Report Posted May 2, 2007 Could I get some pics and a price for the fatties please? Thanks. :happy: [email protected] Quote
alisn4x4 Posted May 2, 2007 Author Report Posted May 2, 2007 Could I get some pics and a price for the fatties please? Thanks. :happy: [email protected] done. Quote
alisn4x4 Posted May 3, 2007 Author Report Posted May 3, 2007 (edited) ::UPDATE:: :MOTOR HAS BEEN SOLD / PENDING PAYMENT:: :: FRAME PENDING SALE:: open to offers on the other items. pm me. Edited May 3, 2007 by alisn4x4 Quote
SuShee02 Posted May 3, 2007 Report Posted May 3, 2007 PIPES AND SILENCERS STILL AVAILABLE? GOT PICS...PM ME Quote
alisn4x4 Posted May 3, 2007 Author Report Posted May 3, 2007 PIPES AND SILENCERS STILL AVAILABLE? GOT PICS...PM ME pm sent. send me your email for pics. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.