Seat rubbers underneath

[baddsheee]

Anyone know where I can find these rubbers bumpers that go underneath the seat. My bike only has two. It looks like the 2 up front are missing. Is this correct or should there be 4 of them. My seat moves like a bitch.

[FireHead]

Anyone know where I can find these rubbers bumpers that go underneath the seat. My bike only has two. It looks like the 2 up front are missing. Is this correct or should there be 4 of them. My seat moves like a bitch.

James Lucky ATV. They sell some cheap urethane replacements that are pretty neat.

[baddsheee]

James Lucky ATV. They sell some cheap urethane replacements that are pretty neat.

 

Thanks for the quick reply. Got any contact info or where are they located?

[nunyabinness]

james lucky...

 

www.jlatvproducts.com or 1-800-233-2637

 

i just happened to have a Dirtwheels magazine sitting right here.

[FASTOYS]

We carry the Yamaha parts like that too if they dont have them...

[Screaming Yellow Zonker]

here is the part number 22W-24741-00-00 and the part runs $2.66 each. that is through the dealer.

[.]

make sure when you get them you epoxy or silicone them in or you'll lose them right away again. If your seat still moves afterward you can bend the latch hoop on the frame down a little bit and it should stop

[FireHead]

We carry the Yamaha parts like that too if they dont have them...

FYI: James Lucky is selling aftermarket seat bumpers that are made of a different material than the Yamaha parts. I don't know if there is a price difference or not. I personally like the feel of the JL parts over the OEM Yamaha parts.

 

James Lucky is located somewhere in Northern California if I remember correctly.

 

As always, Jeff @ F.A.S.T. is a good place to met most things from what I hear.

[baddsheee]

Thanks guys,

 

I beat down the metal piece on the frame with a rubber mallot :thumbsup: . Seat holds down tight now. I checked the seat under the blaster and it only has 2 in the back also. When I put the rear ones towards the front, I couldn't get the seat in ::

 

How many are the banshee seats suppose to have?

 

It is tight now but would like to have the front ones if they are needed.

Thanks

[EastCoast Banshee]

I found the the bumpers used for the stock pipes worked wonders pretty sure there a little longer than the ones used for the seat.

[MILO]

i got mine from upp racing about 4 years ago, and they are still there and working great.

 

upp racing

[FireHead]

Thanks guys,

 

I beat down the metal piece on the frame with a rubber mallot :thumbsup: . Seat holds down tight now. I checked the seat under the blaster and it only has 2 in the back also. When I put the rear ones towards the front, I couldn't get the seat in ::

 

How many are the banshee seats suppose to have?

 

It is tight now but would like to have the front ones if they are needed.

Thanks

The Banshee is supposed to have 4 rubber things on the seat.