loctite on e brake block offf

[HardIzZlE]

im about to put on my e brake block off plate & i wanted to know if i should use loctite on the 2 bolts

 

 

thx

[CadillacBanshee]

You can if you want. If you plan on taking it off to polish it or for any other reason DO NOT put loctite.

[FireHead]

Antiseize is probably more appropriate.

[Bansh-eman]

i just bolt mine on... theres really no issue if it comes loose or lets dirt behind it... there is a seal on that shaft... id just tighten it down but if you want to loctite it use blue so its not a bitch to get off...

[ClimbAnyHill]

I didn't use it my blockoff, never had a problem.

[seabass]

I didn't put lock tite on mine but I did put a thin layer of gasket sealer on it. It's never come loose.

[FireHead]

I didn't put lock tite on mine but I did put a thin layer of gasket sealer on it. It's never come loose.

I think I may have put some anerobic gasket sealer on the last plate I put on. It's a good idea for sure. :thumbsup:

[HardIzZlE]

ok thx guys just wanted to make sure dident want something like dumb part to fall off

 

 

sry for the double question but should i used loctite on the clutch & stator side bolts??

[ClimbAnyHill]

ok thx guys just wanted to make sure dident want something like dumb part to fall off

sry for the double question but should i used loctite on the clutch & stator side bolts??

I didn't use it on that stator cover either & running fine! I've checked those screws after a few weeks of hard trail riding and no prob there. Remember to replace those stator cover screws with allen head ones!