Bansh-eman Posted March 20, 2007 Report Posted March 20, 2007 ok guys i got some tusk tie rod ends from RMATV but they where too big... what and where have you guys been getting tei rod ends that will fit stock spindels and not need to be splined... i need male style tie rod ends.. Quote
BenBB Posted March 20, 2007 Report Posted March 20, 2007 I got the Honda-style tie rods & ends from www.trailtracksand.com for like $90, they have male thread on the rod and female on the ends (I think they are Tusk as well and RMA prolly has the exact same thing). Before that I was buyin' OEM ends from like Ronnies or Yamaha of Troy for like $35 a pop. If you need a couple I got one outer (reverse thread) and like five inners (standard thread). Quote
FireHead Posted March 21, 2007 Report Posted March 21, 2007 ok guys i got some tusk tie rod ends from RMATV but they where too big... what and where have you guys been getting tei rod ends that will fit stock spindels and not need to be splined... i need male style tie rod ends.. Instead of splined, do you mean reamed? Ricky Stator or Janssenn sell a nice tie rod end. Quote
Bansh-eman Posted March 21, 2007 Author Report Posted March 21, 2007 Instead of splined, do you mean reamed? Ricky Stator or Janssenn sell a nice tie rod end. yea im a retard... noted ill check those out once i get home tonight.. free concert on base Quote
ClimbAnyHill Posted March 21, 2007 Report Posted March 21, 2007 Do a tie rod end search here http://www.mcmaster.com/ they have them all. I've never bought from them but they have everything :thumbsup: Quote
FireHead Posted March 21, 2007 Report Posted March 21, 2007 Do a tie rod end search here http://www.mcmaster.com/ they have them all. I've never bought from them but they have everything :thumbsup: I didn't know McMaster sold tie rod ends? I knew they sold heim joints. You're not confusing the two things are you? :ermm: Quote
FireHead Posted March 21, 2007 Report Posted March 21, 2007 yea im a retard... noted ill check those out once i get home tonight.. free concert on base Who's playing at the concert? Quote
ClimbAnyHill Posted March 21, 2007 Report Posted March 21, 2007 I didn't know McMaster sold tie rod ends? I knew they sold heim joints. You're not confusing the two things are you? :ermm: Yeah I am haa!! I'm looking for an end myself & this clicked into mind but it clicks diff while sipping on a drink :beer: Quote
FireHead Posted March 21, 2007 Report Posted March 21, 2007 we saw Craig Morgan.... I like some of Craig Morgan's songs. Was it a good concert? Quote
FireHead Posted March 21, 2007 Report Posted March 21, 2007 Yeah I am haa!! I'm looking for an end myself & this clicked into mind but it clicks diff while sipping on a drink :beer: Hey you got me. I grabbed the McMaster catalog off the shelf in my office and started looking through it for tie rod ends as soon as I read your post. It took me a little bit to catch on to what was going on. For a little bit there I thought every tie rod / ball joint information problems that I have ever had were soon to be over. Tie rod ends are one of the hardest parts to get dimensiions and specifications for. It's almost easier to make your own for applications that you only need a few ends for. :pinch: Quote
Bansh-eman Posted March 21, 2007 Author Report Posted March 21, 2007 I like some of Craig Morgan's songs. Was it a good concert? yea it was pretty good.. small turnout... few houndred people showed up... wasnt bad... im still trying to find these fukin terod ends.. these have to be the hardest thing to find that iv ever needed... Quote
FireHead Posted March 21, 2007 Report Posted March 21, 2007 www.chassisshop.com Once again, are you confusing tie rod ends with heim joints? The Chassis Shop does actually sell both, but they don't have much of a selection of tie rod ends, but they have a huge selection of heim joints. :ohmy: Quote
FireHead Posted March 21, 2007 Report Posted March 21, 2007 yea it was pretty good.. small turnout... few houndred people showed up... wasnt bad...im still trying to find these fukin terod ends.. these have to be the hardest thing to find that iv ever needed... SoCal has not seemed to be a country music type of place from what I have seen so far. Can you post up a picture or a dimensions for the tie rod end you need? I'll come up with a place to buy it from and a part number for ya. :thumbsup: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.