mouse Posted March 10, 2007 Report Posted March 10, 2007 moved from MI to colorado and need to change the jetting and was looking for a starting point. When it comes to jetting i hate it. The pistion i have are vitos power pistions and bore is 20 over if any of that matters THANK YOU FOR YOUR HELP Quote
Banchetta Posted March 10, 2007 Report Posted March 10, 2007 moved from MI to colorado and need to change the jetting and was lookingfor a starting point. When it comes to jetting i hate it. The pistion i have are vitos power pistions and bore is 20 over if any of that matters THANK YOU FOR YOUR HELP What was the jetting before you moved??? Use the same jetting, go down one size on the pilots, and down 2-3 sizes on the mains. You might have to drop the needle one clip as well. Quote
mouse Posted March 10, 2007 Author Report Posted March 10, 2007 the jetting was 158 main and 55 piolet the neddle was on 3rd clip and 2.5 turns out thanks Quote
Banchetta Posted March 11, 2007 Report Posted March 11, 2007 The pilot sounds rich and the fuel screw being 2.5 turns out veryifies that....Try a 152 main, 45 pilot, needle 3rd clip and go from there.... Quote
mouse Posted March 11, 2007 Author Report Posted March 11, 2007 thonk you was just getting ready to go do the carbs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.