Jump to content

Recommended Posts

Posted

IM GOING TO PUT ON MY T5S THIS WEEKEND WITH THE TWO INTO ONE FILTER. WHAT MAIN JET AND HOW MANY TURNS SHOULD I START WITH. THIS IS MY FIRST MOD TO A STOCK BANSHEE. ANYTHING ELSE I NEED TO NO? THANKS FOR YOUR INPUT. :thumbsup:

Posted

Due to the temps being somewhat cold I would say your gonna be around 310 for a main jet & I'd go 2 turns out on the screws. With that said it's best if you maybe start out by running a slightly larger jet so you can dial it in from the rich side, to be safe. :thumbsup:

Posted
went riding last weekend and im at 320 main/30 pilot. i have t5s and k&n pods. start high and work down. :ninja:

HOW WILL I NO WHEN ITS RIGHT? WILL IT BE OBVIOUSE. NO POPPING OR LUGGING RIGHT.

Posted

WELL I WENT WITH 320 MAIN AND 30 PILOT PUT ON MY TOOMEY AIR FILTER NOW IT WONT START UNLEESS I TAKE OF FILTER AND PLUG HOLE. WHEN I KICK IT IT SOUNDS LIKE THERES AIR GOING SOMWHERE. WHAT THE HELL DID I DO WRONG? :banghead:

Posted

Are you using the choke to start it? you couldn't of done anything to really mess it up since you didn't do much at all. Sometimes it takes slightly longer to start after you have the bowls off since you have to refill them now, but other than that the only thing I'd maybe do is a 27.5 pilot instead. My shee ran better when I swithced to that from a 30.

Posted
Are you using the choke to start it? you couldn't of done anything to really mess it up since you didn't do much at all. Sometimes it takes slightly longer to start after you have the bowls off since you have to refill them now, but other than that the only thing I'd maybe do is a 27.5 pilot instead. My shee ran better when I swithced to that from a 30.

YA I USED THE CHOKE I TRIED EVERYTHING IT ACTS LIKE IT ISNT GETTING GAS. IF I TAKE THE AIR FILTER OFF AND PLUG THE HOLE IT FIRES EVERY TIME. WHEN I KICK IT SOMTHING JUST DOESNT SOUND RIGHT LIKE ITS GETTING WAY TO MUCH AIR.

Posted

It could be possible that one of your pilot jets are plugged. You might want to take them back off and give them a really good cleaning. It doesn't take much to plug stuff up on these carbs it seems.

Posted
It could be possible that one of your pilot jets are plugged. You might want to take them back off and give them a really good cleaning. It doesn't take much to plug stuff up on these carbs it seems.

problem solved. I think my top on one of the carbs was not seated properly. Runs great now

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...