rebuild complete

[pokeatyou2]

i just rebuild my banshee 06 top end

 

i need some input on my jetting i have done a couple of plug chops and im now up to 360 mains and 27.5 pilots on stock carbs does this sound rather large. needles 4th clip richer side(stock)

 

i am riding at see level and the temperatures range between 60F - 90F i dont care if it runs a little richer in the warmer months. currently its about 80F

 

my mods

bored .25

coold head 21cc

dune port

timing +4

boyesen power reeds (stock cages)

dmc alien pipes

dual stage foam filter with k/n power lid

98 octane

motul 800 32:1

i think that is all yas will need to know if i have missed anything lett me know

 

im just after some suggestions any one with similar mods whats your jetting

 

any suggestions would be great lett me know what yas think

thanks daz

 

also i live in australia so i think my temperature conversion ar correct i hope so

[locogato11283]

how did your plugs look? if they look good it doesnt matter if you think 360 is too big. all motors usually require a little different jetting. i say if your plugs look good then leave it. in the summer, jet down one main jet size..

[pokeatyou2]

i was just curious to see what other people with similar mods were running. plugs looked ok but could probably go richer. was curious if there could be an air problem somewhere else