highroller355 Posted February 13, 2007 Report Posted February 13, 2007 (edited) anyone know where to get these? the 2 bolts to tighten up the carrier. and do i need any special bolts for the brake or caliper? thanks Edited February 13, 2007 by highroller355 Quote
locogato11283 Posted February 13, 2007 Report Posted February 13, 2007 you can use any nut and bolt combo really. when i build and sell myswingarms i send them out with a metric nut and bolt combo for the pinch bolts. i think they are a M10 x 1.25 pitch. (the head uses a 14mm wrench or socket) they are usually about 2.5" long or so.. you might need different bolts and spacers for the caliper. not every swingarm setup is the same. Quote
highroller355 Posted February 14, 2007 Author Report Posted February 14, 2007 thanks wasnt sure if i had to use a special bolt Quote
RATBIKE0130 Posted February 14, 2007 Report Posted February 14, 2007 thanks wasnt sure if i had to use a special bolt Buy graded bolts... buying cheap china stuff is not worth the dollar savings. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.