pokeatyou2 Posted February 6, 2007 Report Posted February 6, 2007 i got an old rz side case off a mate and polished to a mirror finish. this case will go on wont it? i havent just wasted my time have i? Quote
BenBB Posted February 6, 2007 Report Posted February 6, 2007 Yep it'll bolt right on. You'll want to block off the oil pump mount/drive hole though (notice the banshee clutch cover has a tranny vent nipple there). Quote
Yaxy Posted February 7, 2007 Report Posted February 7, 2007 Yup, What BennBB said. You will have to buy the nipple from yamaha and attach the vent hose to it. Chris Quote
pokeatyou2 Posted February 7, 2007 Author Report Posted February 7, 2007 i did notice that larger nipple in there i was able to punch it out. what i was hoping to be able to do was use the case breather out of my side case which is on my shee now aswell as the kickstarter seal . what do yas think? Quote
Yaxy Posted February 8, 2007 Report Posted February 8, 2007 (edited) For the price of the nipple and the seal I would just go buy new. You can use the old stuff but you may damage the seal or nipple taking them. After the fact, you may find a leak resulting in additional time and cost associated with replacing them again, (Oil, gasket, nipple and seal ). Doing so will far outway the cost of putting in the new seals the first time. Chris Edited February 8, 2007 by Yaxy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.