nicktoney Posted January 30, 2007 Report Posted January 30, 2007 you know how when you adjust your clutch with that arrow on the case? well here is how mine is set.. ios this right? i set the little arrow a bit, if even at all behind the arrow(towards the flywheel) so the lever had abit of freeplay... (i locked the nut on the clutch with them lined up though) ...and when i pull my lever, the adjustment thing on the case only moves about an inch away... is that enough? or should the arrows be EXACT when the hand lever is set back (not squeezed at all)? Quote
locogato11283 Posted January 30, 2007 Report Posted January 30, 2007 ive always set mine so that it has free play until the arrows line up. once the arrows line up then the rod is pushing on the ball and pressure plate. it doesnt move much. an inch is prolly about right. Quote
nicktoney Posted January 30, 2007 Author Report Posted January 30, 2007 alright... im pretty sure its hooked up right now... side case is on and everthing thanks Quote
Bansh-eman Posted January 30, 2007 Report Posted January 30, 2007 push the clucth arm by hand as far as it goes until it locks... then adjust it to lineup... from there it should be good... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.