Fastashell69 Posted January 30, 2007 Report Posted January 30, 2007 I was wondering what is involved with putting a 4mm stroker crank in my shee. IS the crank all i need or do i need some sort of spacer to keep my port timing right. gasket kit im guessing aswell and new pistons im maxxed out in performance that my 350cc can go and looking for a little more power is the stroker crank a good idea as well? Quote
bansheefreak Posted January 30, 2007 Report Posted January 30, 2007 you will need 795series pistons and cut domes with or without a spacerplate.. biulder should help you decide.. but need porting for a 4mm too get most out of the motor.... Quote
Fastashell69 Posted January 30, 2007 Author Report Posted January 30, 2007 Also my shee is fully sand drag ported like i said maxed out for straight line performance. and i live at about sea lvl and my compression is between 170-175 where i am or instead of the crank should i just hop up the compression to get some more power? Quote
bansheefreak Posted January 30, 2007 Report Posted January 30, 2007 get a 4mm stroker and a set of cubs... Quote
Fastashell69 Posted January 30, 2007 Author Report Posted January 30, 2007 im only looking for like 5-10 more horse since im pushin 75 to the ground. Quote
bansheefreak Posted January 30, 2007 Report Posted January 30, 2007 well go with a 4mm stroker talk to yourbiulder and see what he can do to make sure your porting is good for a 4mm stroker.. Quote
jbooker82 Posted January 30, 2007 Report Posted January 30, 2007 Also my shee is fully sand drag ported like i said maxed out for straight line performance. and i live at about sea lvl and my compression is between 170-175 where i am or instead of the crank should i just hop up the compression to get some more power? 95% of the time if your jugs have been ported for the stock crank then you cannot port them for a 4mm stroker crank. The transfer port duration cannot be corrected. You might have been able to get a way from it if you had a woods port but I bet your transfers have been opeaned up too much since you have a Drag Ported stock stroke cylinders. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.