Carb idol screw

[tyguy]

hey dajoger, how much snow you got down there in detroit? my bro lives in ann arbor and they dont have hardlyany, we have about 6 inches up here

 

 

70' weather in winter,,,, we are at 12', beat that..lol

[kfngrn]

You guys may try alittle bit of silicon on the threads of the screws and nut. Do this so the screws don't come out. Works good.

[ClimbAnyHill]

I removed my TORS & replaced the throttle stuff only, I kept my Thumb throttle, Twist is a preferance.

Don't need to buy the whole kit, just the screw here http://www.motionpro.com/motorcycle/partno/01-0026/ :thumbsup:

 

[dajogejr]

hey dajoger, how much snow you got down there in detroit? my bro lives in ann arbor and they dont have hardlyany, we have about 6 inches up here

70' weather in winter,,,, we are at 12', beat that..lol

 

A dusting, that's it. Got an inch or so, maybe up to 2 or 3 total from Wednesday to Friday. Pretty much just enough to annoy you driving and cover the ground, no biggie.

 

You guys may try alittle bit of silicon on the threads of the screws and nut. Do this so the screws don't come out. Works good.

 

IF you grind the boss down flat, you shouldn't need the silicone due to the lock nut, and soft aluminum...just snug that locknut and it's good to go...

[wrecker03]

Unless you have a Geo, get two from vito's and pay the shipping.

I ended up getting 2 of them from K&W for $4 each + tax, not bad.

 

I bet you mean Jim Riehl's Yamaha...

 

Yup, that's the first time I was in there. I have a hard time going to dealers in the first place. I work about 1 mile from Magic racing but they didn't have any singles, just kits.