magunit420 Posted December 26, 2006 Report Posted December 26, 2006 yeah i got a question....yesterday i started my 95 up and rode it like 5 seconds and putterd out.....so i roll it back into the shop check the spark there was none....so next i pulled the magneto cover and on the pickup coil a little piece of plastic right on the corner was chipped and the coil was exposed. Also the copper wiring inside a few strands was damaged. Is this why i have no spark? should i replace just the pickup or the hole thing? just because i dont no why it broke in the first place. so im thinking it might have to do with the stator coils or something like caused it.....? i need help in a very sad way:( Quote
Bansh-eman Posted December 26, 2006 Report Posted December 26, 2006 (edited) a few damaged strands shouldnt make you get no spark the metal will still condust electricity... have you messured the distance of the pickup from the coil? you should be able to slide a match book in between them edit: not the entire match book if you open the flap... just that small part Edited December 26, 2006 by Bansh-eman Quote
magunit420 Posted December 26, 2006 Author Report Posted December 26, 2006 yeah i got a question....yesterday i started my 95 up and rode it like 5 seconds and putterd out.....so i roll it back into the shop check the spark there was none....so next i pulled the magneto cover and on the pickup coil a little piece of plastic right on the corner was chipped and the coil was exposed. Also the copper wiring inside a few strands was damaged. Is this why i have no spark? should i replace just the pickup or the hole thing? just because i dont no why it broke in the first place. so im thinking it might have to do with the stator coils or something like caused it.....? i need help in a very sad way:( ic.... well then i dont no it was running tits and took off and hit powerban in 1nd and started to shift into 2nd and it putterd out could i have blow it up? i dunno its got no spark the wires are good the plugs are like new. Just when i pulled the cover off and the pickup wqas broke. So i guess i need to fixthat then try it and hope it works.....im still a newbie....ive only had this bike a couple months not to familer i do have a Clymer and it says in the trouble shooting index that no spark my have something to do with the magneto or pickup coil? i need to ride bad Quote
magunit420 Posted December 26, 2006 Author Report Posted December 26, 2006 ic.... well then i dont no it was running tits and took off and hit powerban in 1nd and started to shift into 2nd and it putterd out could i have blow it up? i dunno its got no spark the wires are good the plugs are like new. Just when i pulled the cover off and the pickup wqas broke. So i guess i need to fixthat then try it and hope it works.....im still a newbie....ive only had this bike a couple months not to familer i do have a Clymer and it says in the trouble shooting index that no spark my have something to do with the magneto or pickup coil? i need to ride bad oh yeah and the gap is good Quote
Bansh-eman Posted December 26, 2006 Report Posted December 26, 2006 oh your saying that it runs good at low rpm but breaks up when riding? that could very well be your problem... i thought you ment just to get it running at all.... when your stator has a few broken coils how many and how bad are we talking? Quote
magunit420 Posted December 27, 2006 Author Report Posted December 27, 2006 oh your saying that it runs good at low rpm but breaks up when riding? that could very well be your problem... i thought you ment just to get it running at all.... when your stator has a few broken coils how many and how bad are we talking? No it wont run at all no spark and the top part of the pickup coil is busted and the magnet inside is also exposed and it looks like it rubbed on the 2 raised spots on the flywheel. im just trying to figure it out ya no if that can cause me not to have any spark so i can quit stressing a little bit....i got a new pickup coil on its way but.....im just curious if that is forsure what is wrong or if anyone else had the same problem.....ive heard of guys busting there coil right off and of course youll have no spark after that. Im just nervous is all shes my baby and i love her and i wish she was better so i could ride. Quote
magunit420 Posted December 27, 2006 Author Report Posted December 27, 2006 No it wont run at all no spark and the top part of the pickup coil is busted and the magnet inside is also exposed and it looks like it rubbed on the 2 raised spots on the flywheel. im just trying to figure it out ya no if that can cause me not to have any spark so i can quit stressing a little bit....i got a new pickup coil on its way but.....im just curious if that is forsure what is wrong or if anyone else had the same problem.....ive heard of guys busting there coil right off and of course youll have no spark after that. Im just nervous is all shes my baby and i love her and i wish she was better so i could ride. as in the pick-up (not the coil) just the top of the pickup is broken and the magnet and a few copper wires inside the pickup is broke and some wear on the magnet from the 2 magnets on the flywheel.....from looks it rubbed on the flywheel a little...man i dont no im so pissed though i dunno to replace the hole setup or just fix the pickup. cause whatever or however the pickup got broke it may be in the flywheel? Quote
Bansh-eman Posted December 27, 2006 Report Posted December 27, 2006 wellif its not busted allto hell chancesare that notgoing to casue you to losse 100% electrical... it willcasue a weaker circut for sure, sounds like something else might be your problem. any time the flywheelhits the pickup it useually trashes it unlike yours just getting rubbed... get your self a multimeter and test your componants... go through your clymers and it will tell you how to test the parts..should help you narrow it down some Quote
magunit420 Posted December 27, 2006 Author Report Posted December 27, 2006 wellif its not busted allto hell chancesare that notgoing to casue you to losse 100% electrical... it willcasue a weaker circut for sure, sounds like something else might be your problem. any time the flywheelhits the pickup it useually trashes it unlike yours just getting rubbed... get your self a multimeter and test your componants... go through your clymers and it will tell you how to test the parts..should help you narrow it down some cdi maybe? running it cold have sometrhing to do with somethingt? i lether warm up everytime but the last ride i was drinkn a little well alot of wild turkey and shown off i coudlnt wait for it to warm....so i choked it and let it run like 30 seconds and took off....im dumb iknow and drunk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.