Question vforce V3 install

[hotrodbanshee]

I am installing my v3's and need to know if I use all 4 gaskets supplied with kit? When i pulled off the stockers they only have 1 gasket on each reed cage between the cage and cylinder, the rubber o-ring on the carb boot seals to the cage. Do I use a gasket between the carb boot and the cage along with a gasket between the cage and cylinder the v3's? Thanks

Edited December 12, 2006 by hotrodbanshee

[Washburn]

Yup one on each side of the reeds. 2 reeds 4 gaskets.

[Barrymaxx]

Yea, one between the boot and cage and one between the cage and cylinder.

 

Edit: you beat me to it

Edited December 12, 2006 by Barrymaxx

[smwood79]

oops, I only used 2? Seemed to run OK

[hotrodbanshee]

Thanks for the quick reply.

Yup one on each side of the reeds. 2 reeds 4 gaskets.

[dajogejr]

My suggestion to use a thin skim coat of hit temp RTV, too....

both sides of both gaskets. THIN SKIM COAT....