csrmel Posted November 28, 2006 Report Share Posted November 28, 2006 the stock phillips head bolts are kind of shitty imo. i would like to replace them all with allen head bolts. is there a kit i can buy for this or am i stuck making multipule trips to the hardware store while i try and figure out what all i need? Quote Link to comment Share on other sites More sharing options...
okbeast Posted November 28, 2006 Report Share Posted November 28, 2006 Ive seen some allen head bolts for the stator and clutch cover, but none for the fenders. Quote Link to comment Share on other sites More sharing options...
Tim C Posted November 28, 2006 Report Share Posted November 28, 2006 You might find them on Ebay but I just went to the local bolt supplier and bought a bunch of stainless steel allen head bolts for mine Quote Link to comment Share on other sites More sharing options...
theeechozen1 Posted November 28, 2006 Report Share Posted November 28, 2006 just make a list, take a few of your stockers to match up the threads....and head to ACE. I used the grade 8 allen bolts with washers and it looks bitchen. Quote Link to comment Share on other sites More sharing options...
Stinger Posted November 29, 2006 Report Share Posted November 29, 2006 They are about 20 bux shipped on ebay...I bought a set a few months ago.. Quote Link to comment Share on other sites More sharing options...
RNBRAD Posted November 29, 2006 Report Share Posted November 29, 2006 Look-up "thefastnerguy" on ebay since Russ from alloyboltz is gone. Quote Link to comment Share on other sites More sharing options...
csrmel Posted November 30, 2006 Author Report Share Posted November 30, 2006 damn, theres a 244 piece and 456 piece bolt kit for banshee on ebay. THERES NOT EVEN 244 BOLTS AND NUTS ON THE WHOLE BANSHEE IS THERE? i didnt find a fender kit. all i found were the clutch and stator bolts, which i already have. and some USED rusted out fender bolts that were stock phillips size. i guess ill piece out a kit from the hardware store. Quote Link to comment Share on other sites More sharing options...
RNBRAD Posted November 30, 2006 Report Share Posted November 30, 2006 Actually to replace everything is over 500 pieces. That also includes case bolts etc.. 1 Quote Link to comment Share on other sites More sharing options...
SoCalinIt Posted November 30, 2006 Report Share Posted November 30, 2006 ModQuad.com, RockyMountainATV.com, and AlbaAction.com sells them on there web site. Alba has the best set, but it's the most money. Hope this helps. Quote Link to comment Share on other sites More sharing options...
sand4ever Posted November 30, 2006 Report Share Posted November 30, 2006 I used the kit from alloyboltz on my banshee, but he is gone. I just purchased the bolt kit from "thefastenerguy" on ebay for my wifes blaster. Really nice kit and great service. I was missing the caliper bolts, called john and in a couple days I had the missing bolts. Just my .02 Quote Link to comment Share on other sites More sharing options...
ReBall Posted December 1, 2006 Report Share Posted December 1, 2006 (edited) I used the kit from alloyboltz on my banshee, but he is gone. I just purchased the bolt kit from "thefastenerguy" on ebay for my wifes blaster. Really nice kit and great service. I was missing the caliper bolts, called john and in a couple days I had the missing bolts. Just my .02 when did alloyboltz end? I have had that saved on my favorites forever. I should shelled out the 90 bucks a while ago :: it looked like the nicest kit on ebay. Guess I'll have to check the fastenerguy. Is his kits all labled and such also?Thanks Rich Just checked and alloyboltz is still up and running. They got a store in florida maybe its by you csrmel. Edited December 1, 2006 by ReBall Quote Link to comment Share on other sites More sharing options...
sand4ever Posted December 1, 2006 Report Share Posted December 1, 2006 when did alloyboltz end? I have had that saved on my favorites forever. I should shelled out the 90 bucks a while ago :: it looked like the nicest kit on ebay. Guess I'll have to check the fastenerguy. Is his kits all labled and such also?Thanks Rich Yes his kits are labeled, not quite as fancy as alloyboltz. Still it seems the quality is there. Yea alloyboltz the owner died a few months back and they sold the business. John was quick to fix his mistake and wanted to know if he could do anything else for me. I would use him again. Quote Link to comment Share on other sites More sharing options...
scooter Posted December 1, 2006 Report Share Posted December 1, 2006 i know what you mean i want a set for my side cases, stator cover water pump, clutch cover etc the whole thing i see kits for one piece or the other but not a complete set and i dont want to make a bunch of trips to the hardware store either Quote Link to comment Share on other sites More sharing options...
csrmel Posted December 1, 2006 Author Report Share Posted December 1, 2006 i went to home depot and lowes. both places had very anemic metric sections. i dont understand that because half of america is metric now, so what the hell... besides inches and feet suck. america should just get it over with and go fully metric like the rest of the world. anyways i didnt find anything i liked. they had some allen cap bolts but they would have required seperate washers. and none of it was stainless, just plain old steel which rusts. tusk has case bolts for under $4 a set. but i havent found a cheap set of fender bolts yet anywhere that i liked. none come with the radiator shroud bolts. maybe im just getting to be a crotchety old fart. haha jeez i hope not. Quote Link to comment Share on other sites More sharing options...
csrmel Posted December 1, 2006 Author Report Share Posted December 1, 2006 cascade has the kit for $40. i went to bolt depot.com and found everything i need in marine grade stainless for $16.27 shipped to my door. incase anyone else wants to upgrade to stainless allen head pan bolts thiese are the items you order. These are the items in your shopping cart: Product Quantity Unit Price Sub Total Delete #7314 - Metric washers, Metric fender washers, Stainless A-2 (18-8), 5mm x 15 Each $0.16 $0.80 #7315 - Metric washers, Metric fender washers, Stainless A-2 (18-8), 6mm x 18 Each $0.19 $2.28 #6633 - Metric socket products, Metric socket button head, Stainless A-2 (18-8), 5mm x .8 x 12mm Each $0.27 $1.35 #6645 - Metric socket products, Metric socket button head, Stainless A-2 (18-8), 6mm x 1.0 x 16mm Each $0.38 $4.56 #4795 - Metric nuts, Hex lock nuts nylon insert, Stainless A-2 (18-8), 6mm x 1.0 Each $0.10 $1.20 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.